Search results

Same here … used them a lot very good

I also have the trend … works fine. But I’d look at these if buying today Pocket hole jig

I have no complaints about the Makita blades they cut very well. For my track saw I don’t think I’d change but for the mitre saw will have a look at the metabo and Bosch blades

Thanks always wondered what other blades are like have mostly used original makita or Bosch. Mostly used for softwood or hardwood cross cut and the odd bit of ply

I wondered what makes of replacement blade people favour - I have a 12" mitre Makita blade I see Trend, Saxton and Rennie all have blades a little cheaper than the makita. I looking for 60+ teach for medium to fine 305mm with 30mm bore

Ooznest are easy and fine to deal with

Has anyone got the stetches or pictures mentioned in the thread?

Has anyone added a scale either something like 1 or 2 1. A ruler 2. digital scale like the routerboss? is it worthwhile seems like a good update https://web.archive.org/web/20170303133132/http://aldel.co.uk/RouterBoss/Mounting the Router_Boss_Digital_Readout_on_the_WoodRat.pdf Displays...

some of these are still accessable https://web.archive.org/web/20170624154249/http://www.aldel.co.uk/Contents.htm Displays are fiarly cheap...

https://www.toolboxbuzz.com/head-to-head/best-cordless-oscillating-multi-tool-head-to-head I went for a Milwaukee m12as it is good and more compact than the 18v tool. It has been great. I’m mostly have Makita m18 but don’t like their multi tool.

Does not look 2 years old to me. Get the water pressure tested and I'd change this valve to a new one. If you have a fill loop pressure gauge you should be able to get an idea from that but keep the valve to the heating closed

Totally - I use Mitutoyo also. I tried cheaper digitial ones but the difference is light and day

they pop up on ebay

Great little router , can handle surprisingly heavy load

I have the battery version that came with 1/4 and a 8mm ring. Mostly use 1/4 bit as I have them and have a few 8mm when larger shank is useful eg bigger cutter or spiral cutters

Another vote for Bora Centipede 4x2, and MFT top. Easy to store and easy to setup. I have a benchdog hinge and square but for me I think parallel guides would have been more useful than the hinge. I 3printed the bits for parallel guides based on steel runners and they are good enough.

I looked at the upgrade offer £20 and then looked at my square and considered upgrading. I think the clasp will be better but decided the cams are okay for me. May be a bit slower

I bought a new one off ebay, setup a search and a new one popped up fairly quickly after the bearings in my old one needed replacing. Replacing the bearings is on my list of things to do.

Solid edge community is good, designspark not bad. Both free. I use alibre atom which I bought as I found it faster.

I have a dewalt 625,a trend 1/2 , corded bosch 1/4 and the makita battery trim router. The trim router gets the most use easier to track mount and do a quick job. I leave the 1/2" for bigger jobs or woodrat