Search results

try the website boleynworkshop.com they have pictures of that machine and other coronet machines as well

hi mock i tried a long run of ducting similar to what your proposing and found that at the end of the run there was a big drop off in suction ive kept it to a short piece of ducting and a 2 metre length of hose and that copes with the waste from my 12 inch hammer planer ok . ive got bits and...

hi steve been following the build with great interest you have got a great man cave there ! you can burn the waste but only put it on when you light the stove and dont add any when its lit . that price seems a bit steep for glass is it double glazing your putting in the windows dont look that...

i have a complete 300 exact that i dont use in full working order the later one with the festool fence , got the router drill bracket , wobble washers and a spare blade if your interested pm me

thats roughly the price per cu metre thats the problem with buying in small quantitys they get the bulk discounts and sell for full blown retail all the big boys do it bought some hardwood in hancock and brown wasnt a great a quantity that was expensive all they,re stuff is par unless you buy a...

hi i popped to nottage timber last week very limited supply in fact they told me if theres anything i wanted in particular it would need to be ordered in . i had a piece of european beech 200 by 50 3 metres long and with the vat it was £36 not much in the way of offcuts there either

hi mock for stable wood it really needs drying out preferably as boards bearing in mind it would need around a year per inch thickness to air dry but if your in no rush why not if its free

hi i would think that being a clone of the tormek there may be differences in the fittings but the tiger you have looks a lot like the rutlands model possibly the same rebadged . the jigs are a lot cheaper they also sell the grading stone as well i would try those first

also turn the saw to a 45 degree cut position should gain a few more inches !

very nice clever use of the conduit !

do the gates need to open past 90 degrees ? if not they can be hidden behind the feather edge that would also hide the screws with security in mind, you could also bevel the edges of the feather board to gain a bit more opening clearance .

hi got a late model peugeot expert the swb model 8 by 4 sheets fit in at an angle upright or flat between the arches with the doors open pretty good fuel economy too around 40 plus it all depends what you need it for really

most blades are 30mm bore you just need a reducing bushing most blades are supplied with them check with the seller

if i can help at all im not that far away from you have fun ian

hi gareth im local to you in neath what about your basic tools and learning to use and sharpen them ?

hi steve been following your build looks impressive i would certainly go for the second lock as my choice are you still going with open out on the single door as from the shape of the receiver it may be possible to burst the frame with a crowbar . if opening in no problem but i would add a...

what about pan head self tapping screws

i have one of these between the extractor and machine i kept the pipe runs as short as possible sealed all the joins with duck tape and put extra foam draft excluder inside the the lid of the bin . my extractor is fitted with a bag not a fine filter how often do you clean the filter ?

hi , in the past fitting acrylic bath panels had the same problem i set a marking guage up and scribed the line gradually deepening the groove till i could snap the waste off no easy way think a power tool would shatter it

mark each end then stretch a chalk line ping it then follow the line freehand