Search results

I'm not exactly sure what you want to measure. However I've just bought a Wixey DRO for my Thicknesser which is very accurate, reasonable cost and easy to fit. Before I bought this I did some research and chose a company called Machine DRO part of the Allendale group. They have a wide choice...

I've got a kitty 613 and a Startrite 502e (they have the same set up as the 352). Like others, I'm not sure what your problem is so in order to help you need to give more info. Just to say, in principle, the upper Kitty blade adjuster movement and locking logic is very similar to the...

Information for those owning a Axminster ST480 Drum Sander Combo. I recently discovered that one of the four roller spring tensioner springs had lost tension. I purchased four new ones. I realised that in order to replace a spring you need to know what the initial spring pressure should be...

In all honesty Graham, I would speak very positively about Axminister - they have always done me proud. I'm sure they have their off-day, as we all do, and get things wrong. Technical back-up is brilliant and welcomed especially in these current times. It's nice to hear something positive. It...

With out doubt have a look at the Trend range of tables and routers. Trend is one of the best router companies in the world. Not only does it offer a variety of options you get superb support and product longevity and quality. There's a product for every budget and not to mention a superb...

Block plane is a good call. If it's a big slab a low angle plane will suffice too. A no 5 size sole size will be good. Also, if planning does not work for you, use a decent belt sander and work through the grits to 240 then finish off by hand if finer is needed. As already been said you need a...

Well done Custard. A brilliant piece of work. Very informative and helpful.

Had many of the cheaper brands and all of them have caused an issue and are happlily in the bin. In simple terms you get what you pay for and will never buy another. If you want accuracy and longevity, it pays to spend a decent amount if money on devices such as measuring aids. In respect of...

One of the reference moisture meters in the world is the Lignomat. Not cheap but certainly accurate.

If you are planning to do more holes of differing sizes then go for Trends Varijig Frame System. A brilliant bit if kit and will last you a lifetime. Once you have this, Trend have other connections and accessories that allows you to you extend use of the Varijig components. A no-brainer for me.

Does it have to be this make? The Trend ones are one if the best and you have more chance if getting a used one. Check out Trend stockists as you could get a new one on offer.

Just picking up on your cross sled comment. I used 40mm wide worktop edging under mine. You get them in 3m lengths and get the 3mm thickness one with high gloss finish. Just space them every 8 inches but importantly each side of blade plate. Works a treat but be aware that if using old cut...

Cedar of Lebanon is the traditional way to deter moths and the like and referred to by many of the older craftsmen, and literature I've come into contact with - that does not mean to say it's the only solution. The smell of Cedar of Lebanon is slightly different to any other cedar I've...

It certainly looks like it's from the 70's or 80's. That being the case, I guess it's a veneered top with a solid wood rail on the front. I think like Skeetstar says, you need to find out if the top is veneered. If it is, it's not going to be easy if you want it to look perfect. Come back to...

I have been reading articles on the above subject matter and would be very interested to learn from fellow cabinate makers of their view and experience with using their chosen beeswax polish. In particular to, the pros and cons of why it is preferred over a Turpentine variant versus a White...

It's very pleasing to see a detailed article on this subject and well put together. I hope readers aspiring to achieve a satisfactory dust extraction system will take the time and trouble to read this as part of their on going learning into what is a reasonably complicated matter. Furthermore...

Which supplier do you use for these please ?

AES. I support your view and many others. They are fine for certain applications but personally I wouldn't use them where the wood is going to be stressed or if the hole could be seen. I mainly use traditional methods. I've seen some top-notch cabinet making companies use these joints when...

If you are happy with your thicknesser and you have the space, there is nothing better than having both machines. No faffing about changing tables. It makes your life so much easier. The down size is that you are limited to choice as Europ seems to be hell-bent on planner thicknesser...

Once you have routed or carved your letters/numbers, all you need to do is paint them using an acrylic oil paint - 2 coats min. Keep over-spill to a min. All you should have to do, once properly dried, is either put your sign through your thicknesser or belt sand off the face until the figures...