Search results

Hi everyone, Sorry for the lack of updates but I have been trying to decide what to do regarding the wood. After many deliberations and several quotes from a few merchants, I decided to go for the upgrade of the top and aprons to steamed beech. The main reason for this was that given these...

What they said ^^^^^. Definitely very generous I would happily take this if I was any closer or had a car

Which P/T do you have? and where are you located?

Any idea how much this would cost to post?

I am guessing items 2,3 and 4 are gone but if not please get in touch and I will happily take them

Hi everyone, I know it has been a while but just wanted to give an update on this. So I went with the UJK parf guide system and built my own table from MR MDF. Gave it a try cutting some plywood to build a cabinet for my router table and have to report I am pretty disappointed as I am not...

Are any of these still available?

Would be interested if still available

Hi everyone I thought I would start here yet another workbench build project. My plan is to "replicate" Chris Schwarz knockdown bench he purposes on his book. The reason for that is that I use my garage which is shared with several other uses so the possibility to disassemble it flat was the...

Brilliant this is exactly what I was looking for.

Hi everyone, I am thinking in building my own version of the Knowckdown Nicholson Workbench proposed by Chris Schwarz (https://blog.lostartpress.com/2014/09/1 ... workbench/). However, I cannot seem to find the hardware he uses to attaches the pieces together. He calls them Ductile mounting...

Do you have any pictures of the completed setup?

Hi everyone, It has been pretty clear to me over the past few weeks that my current setup of plywood board on top of saw horses needs to be replaced with a proper workbench. However, due to space limitations, I need it to be both an MFT/track saw table and an assembly table. I saw that...

Good to know as I certainly have plenty of tools on the future purchase list. Good quality wood is certainly one of them but until I can get accurate cuts I will stick with pine

This pretty much sums it. At the moment I am changing my mind with every single post on this thread. And thank you very much for the photos they really help put things in perspective. My main issue is really space, as the garage is about 2.5x4 meters or so so everytime I need to use one tool I...

The Festool MFT table with its table slide definitely fits a lot of my requirements. But can you purchase the track slide separately at all? The UJK system, in my opinion, does not really help, I mean the table is great and the ability to do your own even better. But for cut repeatability, you...

Wouldn't the play in the sliding action contribute more to the accuracy? I know I can adjust the angles of cut but there is nothing I can do about the play from side to side while cutting

It seems like my previous reply didn't post. I know I am limited to cross cuts but I can do rip cuts with my plunge/track saw which is still not as precise as a table saw due to variations between measurements but does the job. I was actually considering the Metabo KGS 254 which is only single...

My track saw is a plunge saw sorry if that was not clear. I do like it for cutting panels and have no plans to get rid of it.

Thank you for your suggestion, this type of saw was completely outside my radar so will have a look at them