Search results

Totally Outdated Rubber Yuppies

you could strap them around the outside of your car (like they do with fishing boats) then you could be less careful when in the supermarket car park

I have been working with that a lot recently (it was all from an old church) it looks very much like Pitch Pine. It is a very hard and dense "soft-wood" with beautiful end grain

just look at Labour in this country - you could hardly get a rizla paper between them and the democrats mind you, in Trumps case, the democrats will be less harmful to us here in Europe

that's quite fantastic, have you got it all put together yet? a couple of questions; What happens at tool changes, do you get a chance to manualy zero the Z, or do you have to use tool height offsets (G43) On long programs, can you stop the job anywhere then go back to that line number the...

Woolworths ? I remember them - did we send them to Aus or did they go all by themselves?

How do I measure collet so as I can find an after market one at a sensible price For our metal working lathes it is like ER32 ER20. but these collets are much longer and slender, bit unusual from what I have seen before can't justify £50 for a little collet

I don't want Trump to throw Ukraine under the bus, and likewise I din't want harris to throw israel under that bus. Either is not good. As usual choice of least worst Harris is probably less worse than Trump but think Trump will win. ***** state of affairs

was going to do a climb cut around the edge first and then do a Face cut

Thanks for that - I am very limited with the tooling for this machine (if I get going with and show that I can use it they will buy whatever I need) so what I was going to use for this experiment was a 19mm bit like this was going to use a 12mm step-over (cut 12mm every pass) and cut 1 mm...

If you are going to use a cnc router to level a warped disc (400mm dia) would you just create a linear path that goes from side to side, or would you try and make a climb cut all the way around the edge before the linear passes and how much woud you come down with each pass 1mm? and is there...

didn't know wether to start new thread, but thought I would tag onto tis? anyway, any thoughts on what this is? i was thinking Elm?

Not sure if Trump is good for anything - bloke lies about everything, bit of a disaster if he wins the US election next month (and he could) But back to Israel / Iran. On Oct 8th last year, Israel should have flattened Iran, bombed them back to the dark ages (which is culturally where they...

not really, I may have wanted him to win, but I voted tory to keep the SNP out. So I can genuinely say I didn't vote for him:)

I am just so utterly disappointed in him, I wanted him to win, I thought we were getting someone beyond reproach, someone who would be the opposite of Boris, someone honest and decent, someone who we could trust - but its just more of the same

Adaptive - (is that what you mean by a strategy)?

the following 'tapered holes' was from a CAM that I made from a 3d drawing in Fusion, the simulation works perfectly in Fusion, however it fails on the CNC Router by making the holes too big - and I can see from the toolpath on the CNC Router where it has gone wrong (my red pointers) what could...

anyways, the leg is finished and tested does this type of leg have a name, and do the individual parts have a name The solid round bit that is vertical And the 3 separate legs that touch the ground

not so sure if that would solve the difficulties I encounter - I would still need to get the angles precise so as the table would stand level

and now for the bit I always struggle with, I can do it but find it so time consuming and difficult - I would love to know how this is done properly, you know, cabinet makers of yester year would probably do this in a morning, but how, there must be a technique, a method so first question what...