Search results

Top it up and it should be fine…let us know the outcome…👍

https://www2.theiet.org/forums/forum/messageview.cfm?FTVAR_FORUMVIEWTMP=Threaded&catid=205&threadid=35507

Basically they are oil damped solenoids/relays….old school

Is everything turning freely? Remove the belt so the motor can run without any load. if it’s still The same, connecting power direct to the motor to see if it runs ok…process of elimination…

The simple answer is…don’t use wood for making bird feeders, if you have squirrels near by…

The pine martins have been introduced in some areas to remove the grey squirrels so red squirrels can be re introduced

White spirit will dissolve the oil, but not sure how it will affect the resin…try a small area first….stronger stuff like brake cleaner, and cellulose thinners will also dissolve oil, but could damage the resin

If you look on Ebay at Camping gaz ..you’ll see lots of similar ones and refills etc…

A band saw comes in really useful when you get fed up of making standard straight edged boards…and opens up totally new design ideas..

When looking on EBay, widen the search by putting in compound vice as well…would a small compound table be suitable with a vice mounted on top?

Replace it with a steel one…

Make a 3D tapered plastic insert that fits inside the wood

I think you could easily make a platform to fit a wood lathe

Exactly….what are you trying to do?

It does say approx sizes….if it’s for a tailstock, I guess it’s to repair an existing morse taper, but the mt1 or 2 is a bit confusing…it must be one or the other. Trying to make one is beyond the average and probable advanced diy.ers capabilities I’m sure… And why so long?..🤔 more...

Cut a load of 1.5” plastic tubing into 1’ (maybe a bit longer) lengths and glue them onto a board…then more on top etc…so it works like a wine rack…slip the files inside..

There’s only one way to find out, go in and try one….With Parkside stuff you get what you pay for….not a lot.. You’d be better looking on EBay for some good used ones… I like the F type clamps with a sliding screw handle..

Have a look at this…👍

https://www.rdgtools.co.uk/ plus plenty on EBay…