Search results

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. A

    Tight or not tight enough

    No no a few packs of that packet came with the saw didn’t use any As they were a bit discoloured Should have worded it a bit better I will use Olson No5 until I get a bit more proficient Sorry for the mixup
  2. A

    Tight or not tight enough

    Using new Olson No5 blades Got a lot these ones with the saw Loosened the blade clamp holder couldn’t find my feelers But the clamp is free to move
  3. A

    Tight or not tight enough

    Goodness you are one handy guy
  4. A

    Tight or not tight enough

    I will loosen the knurled thumbscrew to 1mm above the top clamp The rubber ring is still in its place Don’t see a way to loosen the bottom clamp Try and find my feeler gauges now Many thanks for the info
  5. A

    Tight or not tight enough

    What bungalow says will this not give the blade more play
  6. A

    Tight or not tight enough

    Surely you are kidding me on Only got the saw a month ago Had a lot of encouragement from Galvanisednuts
  7. A

    Tight or not tight enough

    Just some animal ones i got out a book
  8. A

    Tight or not tight enough

    Many thanks for your help and advice I shall report back my progress good or bad Bernard
  9. A

    Tight or not tight enough

    Yes cuts it fine at the moment can only do rounded 90degree turns Not got the confidence or experience to turn the workpiece quick Have tried it but still get an awful fright when the blade breaks
  10. A

    Tight or not tight enough

    Altered the blade tension
  11. A

    Tight or not tight enough

    The ply is laser cut A4 from amazon I will do as you suggest with the tension then Let you hear it again Is there a certain way that the reverse tooth blade fits Or just teeth pointing down
  12. A

    Tight or not tight enough

    Wee video
  13. A

    Tight or not tight enough

    Olson NO5 reverse tooth I will try to put a wee video of the tension up next post
  14. A

    Tight or not tight enough

    Apologies Hegner multi cut 2 scroll saw
  15. A

    Tight or not tight enough

    Snapped three NO5 blades sawing 6mm birch-ply Blade doesn’t pull out the clamp it actually snaps Certainly not pushing to hard Getting a good tone of the blade when tension is set But is it the right tone
  16. A

    Lamp holder

    Do you possibly have a description for the light
  17. A

    Lamp holder

    That looks the berries how does it fasten on
  18. A

    Lamp holder

    Where could I possibly get the tube that fits on to the c bracket That you can fit your magnifying light into
  19. A

    Grease proof paper

    Watched a video on YouTube Lady using the scroll saw Said that she always wipes the table with grease proof paper Before she starts scrolling what would be the reason behind this
  20. A

    Air blower bracket

    Much appreciated
Back
Top