Search results

If you let me play your banjo with a clawhammer it would definitely be dramatic

or to have the business dramatically fail or is it fail dramatically?

drum width?

"Traditionally" ( @AES 😛 )in all the fancy cabinet work like Louis XIV type stuff, where metal was bonded to wood, fish based glues were used rather than regular hide glue. probably due to the fact they act sort of like an epoxy in tht they are viscous and form a rather hard compound on curing.

If you fancy the DIY approach then watch this, very cool

If a one off then use a 7TPI panel saw set for ripping

or Scotland. Well not any more :rolleyes:

very nicely done and welcome. shellac finish by any chance?

look for lasertran online. They make transfer decal papers that you apply just like on a model plane kit after printing. They are available in clear, white, various metalics and some other colours. I used them about 12 years ago when I repainted my bike to be in Irn Bru colour scheme with all...

Depending on the size of the piece being done, I use a mix of methods. For largish bits, I use my proper vacuum pump which is set up with 2 x fire extinguishers between it and the work. They have valves that allow me to bring them to vacuum first and allow rapid air removal from the bag when...

did you use flat or curved cauls? ideally you want a slight curve on the bottom of the caul so that as you tighten it down it spreads an even pressure across the board. Otherwise you may starve the joint towards the middle of the board leading to failure fairly quickly after assembly

industry standard reference book for the last 50 or so years has been: Human Dimension and Interior Space: A Source Book of Design Referecve Standards Also "Hard Facts About Soft Machines" is pretty good too

mesquite mmmmmmmm bbq😋 welcome

consider using a soap finish if you do use ash. Here's Mr Schwarz giving an intro to it

picture framers guillotine like this on the bay or if you intend to do a lot https://www.scosarg.com/morso-fillet-hand-guillotine?geoip_country=GB&utm_source=google&utm_campaign=shopping&utm_medium=cpc&gclid=EAIaIQobChMIrPC2nuf1_QIVTAmLCh2w_AvlEAQYByABEgKg9vD_BwE

MDF actually has the ability to take around 90kg being hung from a contiguous piece of board. from a single screw before giving way. The gosforth handy mand has a vid about it on his youtube channel from a few years ago. MRMDF is a little bit better given its differing structure.

The standard cardboard urn used by crematoria is the same as a full size bottle of whisky witht he ashes filling about 2/3 of the tube. So a box about the size of a case of whisky would be about right

+1 for the Bosch GCM 12

That's just taking the buscuit

That's due to them playing on their Amrican heritage in the US marketing and knowing they wouldn't sell anything to the yankees unless they belive it is American made.