Search results

There is or at least there was a known problem with some boilers when used with three port valves it is because of the way they work electricaly. They can work fine most of the time then won't turn off, which seems to be your problem.

Do you know if you have a y plan system with a three port valve to control heating and hot water, if so look up three port valve problems I think you may fine your answer there.

Looks absolutely amazing, but processed sliced cheese???

D B C or Danish bacon company?

These hinges will to a degree do what you want, but the base plate covers about 60mm so you will need to pack out your 45mm another 15mm and they need a space of about 10mm between the back of the door and the face of your frame so you might want to recess them into the frame. They are washing...

Are you still looking for a solution? If so I will try and post a picture of a hinge that might well do what

Are the pictures that you have seen real plywood or are they plywood edging? A lot of new plywood furniture is I believe chipboard or mdf that is cunningly lipped to look like plywood.

Is Willow even a commercial timber, yes cricket bats are made from it but as far as I know they tend to grow their own.

I'm on the edge of your range, what size is your bulk of wood?

On mine you could yes, in fact in the end I put a new contactor on my planer and ran them as separate machines. Only used the morticer once though complete waste of time so took it off.

Let me know if you need more information.

64mm long

This might be a compleat load of tosh but I think Western red Cedar is exported green , basically it dries so easily and without alot of shrinkage that it's not worth seasoning in the conventional sense let alone kiln drying.

I had one nearly forty years ago did me well and got me started in business.

My workshop wired professionally is fitted with 5 pin sockets, most of the machines that are not hard wired have no need of a neutral so only use four of the five pins. I opted for 5 pin sockets to try and future proof things.

If your spindle moulder has a 30mm shaft with M16 female thread at top then you need this;) I used it in a LUNA spindle and a dovetailing set up. A 3/8" collet for a 30mm spindle with M16 thread. £25 posted (in UK)

Times up. Final pictures . as assembled before its installed. And installed and loaded. So Doctor Bob is absolutely correct and gets the clap👏👏👏👏

Well here is a bit more, must be the spinny, wizzy, gun barrel lazer tube thingy watsit.

Few interesting ideas there, lets see how it's going though. Here is the first bit of cutting out.

Fun project on the go at moment, what can you make from an off cut of birch ply, three bearings a bit of waste pipe and some leftover dowel.