Search results

Look for a hinge made for a thicker door, they are available for 25mm 40mm etc. ie door pluss the tile that should then throw the door over the right amount.

So finally we have the result, still no mains connection but through a mobile generater, the answer is 9 that is 9 needed rewiring including one that the the electrician had mixed up the wires in the distribution board.

Well it means that SSE has mixed up their wires so my machines will all run backwards if wired correctly.

Even though there has been an attempt at bribary by an unnamed person who thinks 14 is the answer, I will try and be honest and fair when I find out, hopefully soon just waiting for the meter to be fitted now. By the way the lines man / jointer who came today and fitted the fuse head to the end...

Sorry but there is no electric to test rotation. And even if there were how do you connect three red wires to three red wires?

Bob not sure how to get only one wire wrong maybe I've been doing it all wrong. Ps can't find bank details.

Good tip, thanks.

Sorry 21 forgot the new roller door.

As a few here may know I have been moving workshops, well for the last few weeks my electrician and myself have wired up 20 three phase machines some quite new but a lot old with just three red wires so it's a 50/50 chance that the machine turns the correct way first time, now so far there is...

I think you need to remove the effect of the water in the glues that you are using, it will be causing the veneers to expand and thus causing the warping on drying, to this end I would think an epoxy type would be a better bet.

It's always worth getting another quote, yours to me sounds about right but other people look at jobs differently and quote will reflect that. Try asking company's that are looking for work ie advertising.

Spray gun cleaner or cellulose thinner I find will soften it enough to peel off.

I strongly suspect that some less informed people have in the past put a old axe or hammer head in the fire to remove a broken handle before replacing with a new one.

Kind of you but got nowt to put on it now!

Well coming on at last not only a floor but walls S well.

And to just add to the equation don't forget to allow a bit for cleaning up the faces of the ply before polishing. although CNC can be very precise there is also a lot of trail and error your material won't be exact and the cutters won't necessarily be what they say either. spirals are often...

Bobbin sander table insert, small holes for dust extraction.

Yes I think it's a bit to strong might need to time it down a bit.

Well so much for the 5 and a half weeks this is what it looks like today, well at least it's now out off the ground.