Search results

Glad to hear it works well as I'm expecting delivery early next week... This was the thread https://www.ukworkshop.co.uk/threads/bosch-gcm-12-gdl-replace-laser-with-saw-shadow-line.127312/

I think the Narrow Cut Guides are an add-on to the Parallel Cut Guides, on Instagram, Ralph has posted PRODUCT UPDATE. Having a light bulb 💡 moment with our parallel guides, so decided to sit in the workshop to test this out. Narrow cut guides attachment which attach to the Parallel Guides...

...

Does this help - I've processed the image to enhance the text

They're definitely decent squares, I got the K53M-350-S which is the 350mm version, it's currently £2 more expensive than the 250mm model above https://smile.amazon.co.uk/gp/product/B00RD59PZQ

Festool CARVEX PS 420 Jigsaw (240v) currently £243 at FFX 2 blades Splinterguard Systainer 1 https://www.ffx.co.uk/product/Get/Festool-561590-4014549186640-Pendulum-Jigsaw-Carvex-Ps420-Ps-420-Ebq-Plus-Gb-240V

Thanks, I can do electrical so I can always look at obtaining a higher wattage LED if necessary Nothing ventured, and all that, so I'll give it a try - off to the auction-site-that-must-not-be-named, go I... ;)

@Westy619 I'm very interested in one of these... but a couple of questions before I pull the trigger... I assume that it's an LED light so... What's it's estimated lifetime and is the bulb replaceable? What wattage is it? Is the shadow line visible in daylight? Thanks

Can I make a suggestion... If you have an MFT at one end and route one or two 20mm slots in the bench at the other end, when you need to use a long rail you can align it using the dog holes on the MFT (if you use raildogs it'll be clamped firmly in line with those dogholes) then you can clamp a...

Very good, it's come out accurate enough for anything I'm likely to need - dogs in the holes line up perfectly in both directions with a straight edge and the rows/columns are nice and square according to the largest square I have (600 x 300). At some point, if I'm bored, I might try the 5 cut...

I used the cncdesign jig to make my MFT top, to my mind it has one big advantage over the Trend jig - it's larger at 2 rows of 11 holes verses 2 rows of 5 holes and, to quote Trend 'When using a jig there will be a cumulative error that cannot be avoided when indexing the jig on existing holes.'...

When you're looking at the pressure washer specs, don't just look at the headline PSI figure. With a pressure washer you need to look at both pressure and flow rate as, at a given pressure, the flow rate dictates how long a job will take - small pumps can generate high pressure but low flow rate...

I've got a cheapo Evolution mitre saw (non sliding) that I only use for quick & dirty stuff, like chopping featheredge to length in the garden. I got it because it was cheap, lightweight and I can set it up on a workmate virtually anywhere - it's not very accurate but serves a purpose When I...

Yep, Kranzle would be my recommendation - I went through a number of the higher-end K'Archer/Nilfisk pressure washers that broke down within a few years. Then in 2014 I bit the bullet and bought a Kranzle Profi 160, it hasn't missed a beat and is still going strong. A part from their great...

Are you the real Arthur Jackson then...?

LED strips like these are under an inch thick and give out lots of light https://www.amazon.co.uk/dp/B07GCL3LQ7 If you don't have a lighting circuit, you can just wire them up to a mains plug

As part of a process of elimination, why not try a test without the vacuum hose attached - if the swirl marks don't appear, you've found the culprit and can concentrate your attention in either reducing suction further or rerouting/supporting the hose. - if they still appear, you can...

If anyone wants a copy of the DeWalt Powershop Handbook it can be downloaded at http://www.drosera.f2s.com/RAS/DeWalt_Powershop_Handbook.pdf

This is my 'toy' one of 167 in RHD with only 370 made in total. Initially built at the BMW factory in Spartanburg USA, then shipped to the Alpina factory in Buchloe where it was reconstructed with a hand-built engine, bespoke interior, suspension etc.

I'll take a trimmer at £30 if I may - sending PM now