Search results

I'd qualify that by saying that it only applies to a 'normal' circular saw. If you have a track saw then plunge away, it's what they're designed to do. I'd do the majority of a cut out like this using a track saw and then just finish the corners where the cuts don't meet with a jigsaw or hand...

https://www.ebay.co.uk/itm/363118147392 £8.49 delivered using code:STEER15 I've just had some delivered. They're 16.5cm wide and about 17cm in diameter (appears to be wound about as tight as most others I've had) - so while not the widest, I'd say they're reasonable value. I've paid more for...

Add the code STEER15 at checkout and it takes them down to £8.50 inc delivery

If anyone wants to replace the wheel on the pdb40 with a 3-spoker, it appears that Amazon now sell one made by Ottertools https://www.amazon.co.uk/dp/B0BRY4QYWF/

So @pe2dave all you really need to go along with your Makita batteries is two more badaptors - one for CAS and one for Ampshare and then you'll be able to use any of those tools ;)

I used the Röhm Supra 871050 - and, yes, the old chuck wasn't the easiest thing to remove, I fitted a large hex key in the chuck (small end of the 'L' in the chuck) and then a steel tube over the other end for leverage. A couple of taps on the pipe with a hammer plus a lot of sweat and it...

I have the PBD40 and, after a couple of mods, I'm very happy with it - I didn't like the wheel so replaced it with a 3-spoker - I was never happy with the chuck accuracy and mine wasn't very good at remaining tightly closed. So I replaced it with a Röhm Supra which is much better.

They have other uses - I'm looking at putting one in my attic. Humping boxes, cases etc. up and down the loft ladder is becoming more of a pain in the coccyx as I get older and at about £150 for a hoist and cargo net, it's starting to look very tempting.

You can save another 1mm if you want to, I've used the white version of these - only 7mm deep including the diffuser strip https://www.buyledstrip.com/en/aluminium-profile-1-meter-7mm-high.html and I used dotless COB LED strips like these (you don't see the individual LEDs because they have...

as with all things, it depends upon how long your piece of string is... I have 3 'normal'* SDS drills... because I use them in different circumstances (and I'm a tool wh0re... :ROFLMAO: ) - Makita DHR263 36v, 2.5J impact - Makita DHR182 18v , 1.7J impact - Makita HR2450 240v, 2.4J impact All...

Biscuits, dowels (or Dominos if you've got the machine) with an external/waterproof glue for vertical alignment plus a flat galvanised (or stainless) plate underneath - if you're going to walk on them, you'll probably want additional supports underneath.

You could try a slide hammer nail puller - supposed to be very effective once you get the hang of setting it

@Molynoox Have you thought about avoiding the brackets altogether and fitting a pigsear handrail?

It's only £58 at Amazon - man maths means that it's now a bargain and you have to buy it... :ROFLMAO: https://www.amazon.co.uk/dp/B08KQJFSKG?th=1

I used the clear version of Barrettine 'Nourish & Protect' Wood Preserver on my large gates and it seems to have worked fine - leaves a nice natural finish, there's been no mould/fungus or weird discolouration and the gates have gradually silvered. I reapply every couple of years (if I remember...

+1 for screws - it takes a little longer but there will come a time when you want to remove the OSB and you'll be very pleased that you screwed them in place rather than nailing them.

You could try a denibber, as used in automotive paint shops to remove specks/runs that are proud of the paint. They are designed to shave off the 'blob' that's above the paint surface without digging into the underlying surface This is the one that I have (others are available) Festool...

The idea is to keep as large a bore as possible for as long as possible. The large bore hoses are less flexible so add a 'whip hose' between the end of the air line and the tool. Whip hoses are intended to stop vibration from the air line pulses but, as they are thinner and more flexible, they...

I've got an AF506 and brads from 20mm-50mm and it has never had a problem with any of them. Once you have set the depth they all get driven to that depth with no need to adjust the compressor - no fiddling about, it just works... Remember the top of the longer brads are higher up in the feeder...