Search results

The 2 things to be aware of with these fryers and oil is it seems as Superduner already stated the propellant's used may have additives that break down the non stick. The refillable sprayers should be used instead, but depending on what temp your cooking at you may go above the smoke point for...

I have 2 fridge/freezers (frost free) both quite old 8-10yrs and the oldest Daewoo uses around 950watts/24hrs or 107watts when running with more on defrost cycle. Mfg says 284kwh/yr The other a Beko uses 750watts/24hrs with 130watts when running, 172watts on a defrost cycle. Mfg says 311kwh/yr...

It would seem that cutting off the plug and replacing it is reason enough for the supplier/manufacturer to not honor the warranty.

Looks to me like the steam that should be building up is escaping, have you tried removing the sealing ring and cleaning/refitting? Also is the lid selector in the right position to seal down the lid? Oh I have one but its boxed for xmas so no chance I have previous experience, just guessing ;)

Revisit by Clive Same result but more detail.

If anyone is looking for a 15 in 1 foodi for a Xmas gift, John Lewis have had 2 deliveries in the last 10 days that have all sold within a 24hr period @ £299 but JL do offer a 2yr warranty with their sales and they are taking unwanted gifts purchased on line back right up to mid January I...

Thanks all for the size and advice, as I thought it wont fit under the wall units anyway so the steam warning while noted doesn't apply now. I went ahead and purchased the 15 in 1 Foodi from John Lewis as they have a 2yr warranty and for less than 24hrs they were the only place in the UK that...

Anybody with a Ninja 15 in 1 model OL750UK can please tell me the height from work top to top of open lid so I can see if it will fit under our wall cabinets?

Thanks for the replies, if it were not for the fingermarks I would have liked to leave it as bare wood, I suppose the wife could go and keep the doors ;) I think I will try button or french polish on a spare bit of oak and see how I get on. I do have some satin polyurethane varnish as a last...

I bought a pair of these Howden doors oak veneer doors. I intened to do the most minimal I could to treat the wood like maybe wax them. 1 door has been fittted for a while with no treatment and I notice oils starting to mark the door where my wife uses the wood rather than handle to open/close...

Maybe the wires are aluminum, or copper-clad aluminum, the op did say he scrapped back the surface to silver metal.

I have a pass through checker and recently monitored the wattage used over 48hrs on out 2 fridge freezers and a garage chest freezer. Of the 2 fridges (frost free) one used around 950watts/24hr with the manufacturer saying 284KW/yr The other one used 750watts/24hr with the manufacturer saying...

On a slight tangent to the main thread direction, can anyone explain to me why POW's are being exchanged on it seems a regular basis? I thought the idea of keeping them as pow's was so they could no longer fight you. Returning them back home after a few months seems counter productive.

I had suggested to me that I use These sleeves but M8 ones I needed were not available local to me. although as I dont know if I was drilling into yellow soft brick or mortar and where the frog was they did seem like a very good idea, but hey I can try that next time. I did want to got the job...

Thanks Terry, yes 600mm shelf with 300mm wall side empty, I did put 1 screw bottom and 2 near the top as yes its trying to pivot. Its just the thought of that mass trying its best to set up a vibration in the brick. Generally I mount stuff that I would happily hang off without fear of crashing &...

I am trying to set up an air conditioning split system at home ready for a local engineer to come pipe it and commission. The external fan and compressor unit is being mounted in unistrut on the back wall of the house above a single story extension. The house is 1963 build & rendered. When...

Its a sidestep to using pre heat for hot water on combi boilers but has anyone here installed a combisave? This fits into the hot water out 15mm from the boiler (within 750mm) and once setup throttles the boiler water output down when a tap is opened until the water temperature reaches 42 deg C...

I started work in the early 1960's as an apprentice electrical engineer in a factory, my first year was spent with an instrument repairer, my main task seemed to be sawing and filing asbestos blocks to shape for insulation alongside bar elements for industrial molds. Fancy standing at a bench...

I really wanted Solar panels when the first FIT was set but I had no spare money, I watched as the FIT payments reduced along with the cost of installation until in January 2014 it got to £5k to install a 12 panel system and I joined the club. The total cost was £4950 and in the sunny south it...

Thanks for the reply, I do have teak oil that I use on the outside hardwood frame of some doors here. I hadnt really considered it for this furniture as it has a smell that lingers for weeks afterwards, or at least the brand I use does, maybe I have a very sensitive nose ;) I will suggest she...