Search results

To put glue under that would create lumps the rubber has gone too soft.

No amount of sticky stuff would sort that you need to order some new rubbers in mate, looks like there is no wheel wobble so you should be able to sort it out.

Put some tape or a clip over the door switch so you can start it then stand back keep your fingers out turn it on and look to see if the wheel is running true.

Is the rubber tyre tight on the metal wheel? if not It should be replace rubber. There should be no problem applying some adhesive. but a tight new tyre should not need any. Is there any vibration to the bottom wheel when the motor is running?

Well stumpy fingers or not they worked very - very well truly amassing, one to be really proud of.

Yes they do but it's not as easy to save a file to the web it seems, download is better. Had a look at the WD cloud storage that looks promising been talking to a tec guy and he's invited me over to have a look what could be done.

So it was your dog and cat in bed with you not your wife, take a little more water with it mate

That is good thinking will look into this.

Thanks guys, At the moment I design a project in Win 7 save the design and G-code in Dropbox, 60 plus miles away that code is entered into Win 7 on the cnc press a button and away she goes. Now Dropbox is stopping use on Win 7 so how to get that code to cnc? I have been told could not do it...

Looking to setup a new Win 11 computer but the problem I have is most of my design software is old it runs great on Win 7 no problems, so was thinking keep both computers what would be the best way to use / link to use win 11 online Win 7 off line without much messing about with mem sticks or ssd's.

What I have always done is cut a template out to the size of the hole you will need less the width of your cutter, double sided tape to place where it will be or drill screw to worktop, if you have a fence setup to your router use it to go around the template to form the rebate adjusting fence...

Stig, I know you are getting a lot of good advise from the guys here but a word of caution, this is an open forum it might be late advise but be careful what you say you don't know who is reading this from the school, contractors, parents, it could even get back to V.

He already has the lathe and wants to use it, we have all been there I think.

How big a chuck would you want? I have a few 3 & 4 jaw chucks from 50mm dia upwards.

An older couple had a son, who was still living with them. The parents were a little worried, as the son was still unable to decide about his future career. So they decided to do a small test. They put a note on the front hall table that they had gone away. Along with the note they put a £20...

Now that's an interesting question there are two ways to sharpen a chisel the right way and Jacobs way. (it's a joke thread before anyone complains) And now for the second part of the question: Two old lads Tom & John met in the park each day to feed the pigeons, watch the squirrels and put...

It would be good if you could keep us updated on any reply they say how the problem happened.

Have a look here: https://www.securefixdirect.com/high-type-wing-nut-stainless-steel-8mm-butterfly-wingnut-5340-p.asp

Works for me Ian.