Search results

I think you should be looking at what is happening not if the producer is Vegan or meat/fish eater.

Hi Timber, Would it be possible to box and mail out to me as I can't get out and would love to have one for a project for my wife please.

Stan I found them better than wet & dry by using a little WD40 as a lube you get a little sludge build up that help to clean as well as bending into crevices and if you keep one edge just for a final rub they do last a long time so well worth the buy, very good on brass at taking out scratches...

Stan, I use these Garryflex Abrasive Rubber Blocks Grit 36/60/120/240 makes a good job.

It looks like it should move forward to get close but not touching the back of the blade, unscrew the little screw on the side and turn the rear screw to wind it forward if it does not move put some WD40 on it to get it going, it should not have any cap on it as you see the relief cut out so...

From the image 106585 it looks like the bearing above the adjusters has stopped rotating looks like a step has worn into it from the blade that would need replacing or refacing, you also need to look under the table what state the guide is in there. The wheels look to have plenty of rubber on...

Tomindales said " Sadly you just wouldn't trust someone like that to befriend young kids these days. " It is so sad today, I used to like listening to the old guys you learnt such a lot from them.

It will help you in the future, if you get a fault on your controls not having to find this one will be a big help.

What we found was If your machine is a cnc connecting the shield creates an earth loup and you get interference on the controls, we know if the motor end shield is not connected it does not interfere with anything the shield acts like an Ariel and collect interference so by connecting one end to...

You need 3 core 240v cable to input on VFD and 4 core shielded cable to connect VFD to motor, connect 1,2,3, of the four to U,V,W connect the 4th wire to earth, connect shield to a star point earth near to VFD only, the cable shield at motor end leave unconnected or you will get a lot of...

Try this company: Automotion Home they sell most things. If you still have problems getting them they would not be hard to make on the lathe.

What size are you looking for, I am going through the shed at the moment and I saw one yesterday.

Read up on how to sharpen chisels and plane blades that will drive away all the crazy dreams.

Hi, just dug my planer out the workshop would it be possible to ask for a copy of the parts sheet please. Got a lot of cleaning to do on it been sat quite a few years.

After an accident stopped me throwing timber about I was stuck at a desk designing on a computer for a stone company and went on to set up a cnc to cut 3D memorials, fireplaces and many other pieces in stone, I then re-built a cnc for myself cut metal parts out to build other cnc's, made tools...

An old friend who is no longer with us was co-owner of Coronet tool company towards the end of trading they held a sale of all stock in Derby it was the Blue colour by then, I think it was in the 70's it closed and the company was merged into Record Sheffield, I still have the two wheel bandsaw...

KUPINK Keyhole Hanging Plate. Look on Amazon

Deflation !!

These are a pair I was left in a toolbox from an old friend who made stringed instalments. They are square section and hardened they cut wood well I use them for opening holes out in brass. One has the name Sorby on.

Very nice love the design of the tops.