Search results

Morning all, Can anyone tell me where I can find some small qty's of 1/8" or 3mm thick Lacewood, Curly maple and one called Canarywood. I am trying some small boxes and could do with getting some pieces around 600mm x 150mm x 3mm or close as please, I can find it in the States but I am sure...

Out for my booster this morning, booking offer came in a text 2 week ago very easy and quick.

Hi Dan, have you had a change of motor as just finished the flange: 14mm shaft, face true to shaft hole inc fixing bolts you just have to drill out your plate once you can spin it you might need to check your plate for true.

Hi Dan, I made one for another member on here mikej460 : he was well pleased with how it turned out. Let me know what dimensions you need include shaft dia and length. Phill https://www.ukworkshop.co.uk/threads/my-bench-disc-sander.128836/#post-1445334

If it;s being fitted in the sunshine or in a warm place it will slide (don't ask how I know)

I would be weary if you do not have contact name and address before you pay, I would get back in touch and say you are not allowed to do that, offer to pay them once you have seen the goods.

I would go for the one with a back plate then if you change your lathe in the future you can change the back plate and keep the chuck.

Yes brake away from the norm this one is very pleasing to the eye keep the paint off the dovetails.

I put a Myford planer away over 20+ago with only wax on beds, the rollers and some screws rusted but the beds stayed really good, I used to warm up the cast beds with a heat gun then apply wax and it soaked into the cast it must have helped. If the misses hold tight to the blankets yes use some...

Get some Silica gel crystals as well as covering up with oil or wax. Sell off any tools/machines you think you can let go and replace at a later date. And good luck for the future.

AllyOpp'ssplat

If the back plate fits your lathe don't let it go with the chuck if you sell it on.

I was asked by a friend's wife if I could make her a Kumiko angle block sure I can I said, I had seen one on here so went ahead with it While I was set up I made a spare set for me to hold and show off, made the 2 sets of four to cover 90 x 15, 75 x 22.5, 60 x 30, 67.5 x 45 all made out of a...

I would write to buyer and explain you cannot refund without going through e-bay request to do so, and as buyer returned items without e-bay they must stand cost to get them back.

Is this a his and hers, I hope you've taken the sharp edges off.

Click here not working

Like minded I too made one at school.

A Scribbling block come height gauge you can fit a clock to it.

I dug mine out of storage last year and cleaned it up, the way to get the bearing blocks out is so simple, you take out the grease nipple each end of the spindle and replace with a bolt once you have undone the grub screws you can pull them out. I hope this helps someone doing the same restore...

What was I thinking? Cut out of a very hard Mahogany but not sure what family it is, so hard it does not need a finish on it. And in the background is a very old tree turned to stone.