Search results

You can use a carbide masonry drill to cut the holes make sure you have the blade clamped down well to stop any movement.

It looks like you have the pin the wrong way round in the 3rd image, practice and practice it will come better

Yes it would be Grease to use in those cups not oil.

1: I started around 1965/6 on making simple furniture for friends while working in farming and progressed into a proper workshop 10 years later on my own I some items for a shop in Chelsea and it took off from there all working from re-claimed timber, gaining a team of 5 lads as we got more and...

Nylon 66 rod cut to the size you want drill a hole and pin or screw to side of drawers. Can be found on e-bay.

Heads down I can see a sharpening thread starting :)

Well my thinking is if dust is coming up then there has to be something not quite right either not enough main suction to take it away or riving knife is thinner than the blade so is back cutting on the up as well, I had replaceable wooden bed plates cut by the blade that was in the saw inc for...

I don't see the point of this as the blade deposits most if not all dust below the blade as it cuts downwards, I would say this is an expensive gimmick.

Back again now, a little follow up to what I posted before, this is what I have experienced & found in the past years of using bandsaws I have had from the large resaws 38" wheels ( these blades were sent away for conditioning and sharpening ) down to what I have now 30cm, over the years I have...

Once set and running true you can leave the tension on unless you will not be using it for weeks between, I never had a problem.

Hi Drew, This is something I have been doing for a while with Vectric software I started in Photo V carve and found it very satisfying and upgraded to Aspire to do full 2.5D models, by taking an image and put it through the import to vectors you can get a very good model cut out. This started...

Welcome Skint, you have made a brilliant start with the horses extremely well done.

I should have gone to Specsavers

So why did you, I find her the most irrigating to listen too give me Sally any day.

stuart think yourself lucky or you would have been as big as Phill

Dave not kidding try Brywax.

My turn to ask what wood is this? I have been looking for some wood with a pattern within for a carving of a swimmer in water, I have contacted some UK wood suppliers and no go so far I can get some figured from the states but would be a big cost on shipping and customs, I came across this in...

Just wait till you get in a sharpening discussion with that, that smile say's it all.

That is amazing.

Have a look here very good quick service and good assortment of cutters https://www.shop-apt.co.uk/economy-single-flute-up-cut-routers-mdf-wood-pvc-acrylic/economy-6mm-diameter-single-flute-carbide-router-slot-drill-for-mdf-wood-pvc-acrylic-52mm-flute-length.html