Search results

Nooo!! you don't bin it, it is a straight forward job to put a new spindle in with new bearings. Images and dimensions help a lot.

Well it looks like these are not like throw away knife blades they are really hardened, a file just skates over the back so the cutting edge must be same. I tried the wood saw last night and it would be good for cutting dovetails, short cut but handles perfect, and now I have an image of the...

Many thanks for the link, It looks like it was supplied with only one of each blade so looks like I have about four life times in it, when I first came across it I just thought it was a Stanley knife until I read what it could do on the handle, it was together with an all metal Stanley bevel...

I use one of the Universal Tool & Cutter grinders and find it great to use and makes a very good job.

Has anyone come across one of these before Eclipse 44 multi tool: has blades for 4 scribbling blades, 5 cutting blade, 1 sawing double side for wood, 1 single side blade for metal, slotting and slitting, found it in a tool box it looks unused all the blades still have grease on and pack away...

Valhalla: Have you given through to Saddle stone? Do you mean Staddle Stones? Yes sorry getting my spelling checher sorted is next weeks job, should be "Thought" and "Staddle Stones"

DRC: I totally agree throw it away when it's days are done whist it is working fine leave it as it is, if it was in a works situation stop/start 12 to 14 hours a day then you would need to change it to current regs but from reading the OP's comments this is his first one I think he would not be...

That is what you call Very well done and I love the floor, the extra effort that goes into producing works like this make's it a work of art.

I have seen them advertised on Foredom in the UK | Metal Clay Ltd

Those old starters will run FAR longer than any new one today they where built in the day to last not throw away, I have two one on a drill press one on a miller both as old as the hills and still to this day still running fine, Why O' Why do people think they need to throw something away if it...

I agree they are not as tasty as double choc chip ones?

3 in 1 oil will be fine.

You want a light oil not thick, they might look ancient but they seem to last forever much like myself.

The barrel you screw off is where you put the oil in you don't have to tip anything upside down. half fill then screw them on again set the bar to 3.3 amp and you should be good to go.

The barrel's with flutes on need winding off and part fill with oil then screw them back so the bar move in line with motor amps 3.3 Most likely you lost the oil when moving.

It's a bench hold fast.

Have you given through to Saddle stone?

Ttrees, You best way would be make the block to fit the space you have in the quill and a snug fit to the casting, fit it all together line up the quill and block with the hole, grind a screw to a point screw it in to mark the block take the block out and drill the hole then fit it back in...

Welcome David, Well I think the seat is in tune with your paving area in the garden looks real good.

What more can you say but Outstanding work from both of you, It is so uplifting to read of your commitment. Thank you and your wife for sharing with us all.