Search results

I am a cad designer, have you thought about building your own machine? this is what I did after buying my first machine that did work but not really to the extent of what I wanted to do up to 3D , so I sat down and designed a machine, found the best quality parts to use a lot from Germany and...

I always use a Olfa L-2 lock follows on with the blade does not stop at the back.

Mothers letter to her son. Dear son, just a few lines to let you know I am still alive, I went to the doctors on Thursday as I have not been feeling too well, your father came with me, the doctor put something up my backside and a tube in my mouth and told me not to talk or sit down for 10...

In a very seductive voice the wife asks her husband "Have you ever seen £20 all crumpled up?" "No" said her husband. She gives him a sexy little smile, undoes the three buttons of her blouse then slowly dropping it to the floor showing her cleavage takes off a lovely little £20 bra and throws...

I had a similar problem and fitted vinyl cushion flooring all over the downstairs flooring it has been great, a quick run over with the vac and if needed from dirty shoes a quick wipe over with the mop I would not use anything else now. I did have lino in the kitchen but found some cracks from...

Very nicely made great look about it very well done.

Lovely work great to see it done again, it bought back memories for me from the early sixty's I was making model travelers vans and carts and made the wheels just the same as you have done but smaller, great work keep it up.

It looks to me as it is 12 tpi Acme. This image is a square thread

Hard to tell with all the dust in the threads give it a wire brush clean and take another image

If you can give the pot a spray of WD40 into it then turn the knob a few times to help clean the contact inside tap it on a towel a few times then try to run it again.

If I were you I would charge a bit more to cover the cost of filler.

There's no problem with using a Myford planer it was one of the best made and in my eyes still is far better than the cheaply made units on the market today. You cannot use the thickening plate without the hold down spring but you can get a new spring cut for it. I did a write up post on...

I did the same for the motor pulley the shaft was 8mm, I kept the old pulley with the old motor so could go back to original if needed.

I have a unimat and that was under-powered so I fixed up a 24v motor and little speed control I still kept the pulley format so I can get the lower speeds with high power more torque and a belt change to the higher spindle speeds it works really well.

Well you got that right!! I thought I was going to see some Jokes today, how wrong can you be.

Bet he said" Oh C-rap it should be 9 1/2"

What are you trying to drill into? also any small drill needs to run at high speed you got your drill press running at max speed, and you really need to have a centre drill / punch mark to start with.

I have been using an old mains power one on clock cases and polishing up small parts, then I saw the battery model advertised with a spare battery so got that and find it better to use than the MP one, and when I needed to use a small router cutter I made a frame to fit the Dremel, I ordered...

I would not go throwing it away it is a cutting fluid https://www.exol-lubricants.com/product/excelfluid-epx-s024/

The wording (His practice embodies a deep respect for the inherent qualities of the materials he works with, evident in his attention to detail and commitment to preserving the marks of previous utilisation.) made me laugh, how can someone ask that kind of money for such cr>p