Search results

Yeah, they list some stuff as 'pallet of accoutrements' ( means carp i think, in french ) and box of miscellaneous tools

I bought some cheap screw in types off ebay. The small inverted t shaped bit slots in between the tiles, twist it 90 degrees to go under both tile edges and then do up the black collar ( by hand is fine ) It pulls them to the same height. Firstly, as said previously, there needs to be enough...

I bought a mobile aircon unit 😆🤣 Unfortunately the mrs gets to use it while im outside on a building site sweating my balls off 🥵

Id be researching this reply.... if those sizes are going to be a good fit for that purpose, thats probably your best bet.... maybe throw out a few emails to windsor chair makers and see what happens. Being as they had so long to sit, they would hopefully be quite stable. Good luck, let us know...

Is a yellowjacket a wasp?

Not a big financial gain, but i got this beauty of a framing chisel..... It was in an auction near ne with a few cold chisels and punches. It was pretty rusty, so ive cleaned it up and reground the edge etc. Chisel and punches cost £14 I also bid on a bag of 'stuff' . I saw the telltale colour...

Nope..... Heres some good music for you instead

Nope, it'll be reddish plastic 🤭

I believe a u.s based company is working at ways to make heat pumps viable.... bill gates is apparently backing them, but i dont know the specifics

As in make your own leads? I guess if you are making a pencil, you might as well go the whole hog! 😎

Ive got the tracer version, takes 3mm leads / wax, pencil sharpener built in to holder. Its reasonably good, works well.... and durable About 8 quid on ebay

It could be pine oak. Its a special variety that starts out looking like pine and then you get a tin of sadolin oak stain......

😵 what else are hobnobs for???

Gypsum could, as in the plasterboard part, but the glass fibres wouldnt. I have no idea if it is asbestos or not, it would have to be tested

Firstly, which type of tablets? Technology or drugs? 😆 if technology, did you dunk the tablets in the tea? Im guessing it wouldnt make them softer..... As for a cuddle, i hardly ever get a cuddle! Just kids and stuff to do as soon as i get woken up 🤣😁 and i make the tea!

Also clear that theres previous damage that has been painted over, so this is probably a regular thing. Any fibres visable causes concern for asbestos, but theres also other products ( like glassroc boards ) that have fibres. The fibres do look long to me, which might indicate fibreglass...

Lets put it a different way. Look at the teeth in question and see if the teeth edges are parallel to the blade / plate. If they taper down, there will be a slight change but not enough that you'll notice in operation. If they are parallel, it'll stay the same. Either way, id just get it...

@Jameshow Flat ground teeth will be square with the blade, but alternate bevel teeth are often tapered ( but not always ) Edit: The top of the teeth will bevel down behind the cutting edge to create relief, so if it were ground down say 3mm, the overall diameter will shrink a bit and the width...

https://solenttools.co.uk/product/solent-tools-tyre-compatible-with-dewalt-dw738-bandsaw/ And: The easiest and fastest way for sure...

I guess it depends on the tooth geometry. If flat ground ( unlikely ) then no. if alternate bevel, it may reduce the kerf half a mm at most. If the teeth are not damaged, they wont take much off..