Search results

I live in Bedfordshire and have an al-ko shredder that I no longer need having moved to a house with a much smaller garden. If it is of any use to you and you can collect it's yours for £25.

By the time you have given 2 coats of paint to each board before fitting that means that each joint will have had 4 coats of paint before fitting and they simply won't fit. As for re painting every year life is too short.

Last summer I clad 1 side of my workshop with feather edge boards. I cut them all slightly oversized and painted them with barn paint. At the joint I put in uprights and then cut the boards to length 1 at a time and painted the cut ends and fitted them while still wet and when finished I gave...

Thanks for that. I always keep an eye out for tools at Lidl but I missed that one that is a serious bargain.

Do yourself a favour and buy yourself a radial arm saw if it is only for use in the workshop.

Having spent a lifetime in the motor trade I can agree with that but any vehicle can be narrowed down not only by its name but also by its chassis and registration number. I think that it is a testament to the quality of the old Kity machines that so many people come here asking for information...

When I purchased my Kity combo machine there was an option to have either a 612 band saw or a table saw. I opted for the table saw.

As I said there is a lot of confusion due to the strange way that Kity used to name and number their machines it is almost impossible to offer any worthwhile advice without a picture of the machine in question.

There seems to be a lot of confusion about older Kity machines, a Bestcombi is a very different machine to a k5.

Just be aware that this is not the vac with the power take off.

I am a big fan old Kity machines and own a 613 bandsaw. +1 for tuffsaws blades and just set it up properly keep it clean and enjoy it.

The other option might be to fix a short stub fence to the original which ended in line with the blade teeth. Works on the tablesaw. This principle has been known for years. My Inca bandsaws came with a short subfence to fix to the main fence and the reasons are clearly explained in the manual...

My saw has 1 capacitor located in the box on top of the motor there is also a reset button on the lid of the box. The top diagram is for single phase and the lower one is for 3 phase.

3rd time lucky.

I think the photos should now show

I have 2 old SB drills and many accessories that I used extensively about 35 years ago some of which belong to my late father. I know that l will never use them again but I can't bring myself to take them to the metal skip at the local tip. Is there any interest anywhere from collectors of...

A mechanical pencil does not sharpen itself.

Never used any lubricant and never had a problem.

Do you actually want me to try and upload a photo of the wiring diagram?

This is a simple problem with a simple solution that I suggested many posts ago. It matters not how much insulation you have got of any quality in your situation unless you introduce some low level heat under it given the wrong set of circumstances that can happen anytime between November and...