Search results

Famag are the best performing/ quality ones I have used.

Make sure the pin holes match your machine and your riving knife is correct for the blade Thickness...The suffix on CMT sawblades signifies different pin hole positions (ie M in this case). The riving knife thickness should be stamped on it.

It does

Try Elesa ... a mînd Boggling range of nobs and handles

I think there are more middle men involved with the Jet filter which will have an influence on price comparison

some parts are différent.. here are the manuals For the old type Wadkin AGS Table Saw hope they help!

FYI... There was a 10´´ Wadkin AGS table saw which took a 10´´ blade and a 12´´ which took a 12´´ blade(also a 14´´ version). The bases were different... they then modified the 10´´ machine and called it a 10/12´´. It would take a 12´´ blade but it would not lower below the table. They continued...

Meddings

Sedgwick don’t offer conventional cutter blocks any more... and only offer Tersa on the PT (as standard) now. They only offer the upgrade option of spiral block on the MB and CP

excellent article ... but you have taken images from my website. Would it be courteous to include a link to our tooling department? https://www.scosarg.com/tooling

So far I have been using it cutting a big oak Butt I found on the side of the road, taking down some ash trees and cutting them for firewood, cutting up some pallets and plywood cases up. It lasts long enough to do plenty! then about 45 / 60 minutes clearing while it recharges.

I have got some laburnum to take out in a few weeks.. about 8 inch diameter if you want

Try to find a not too old Good condition Wadkin BAO/S... 70’s onwards. They were really well engineered and had a pressure bar which helps when planing thin materials.. here is the leaflet: https://www.scosarg.com/media/leaflets/Wadkin/Wadkin%20BAOS%20300%20Planer%20Thicknesser.pdf

I have recently bought a Husqvarna 540i XP... they claimed it would be as good as a 40cc petrol. It is, I am blown away by the ease of use, power and cutting speed. Only problem is the price! Highly recommended.

We had some problems with a very small percentage of the 310s version of the 260 spiral planer... The 260 spiral planers have been brilliant, great value for money and performed really well with lots of happy customers. The 310s model has now been replaced with the new 300C. The 300C planer has...

All Chinese trade tends to be done in US$. The £ vs $ has been all over the place. It has been very difficult over the last few months with supplies from Chinese factories. Normally we have to predict what we think we will need in 3-4 months time and Predict demand, exchange rates and sales...

https://www.scosarg.com/accessories-spares/handles-knobs/locking-handles