Search results

Update: The bed frame couplings were very poor quality, the hooks were just tac welded in place so when you couple the joint the hook bends outwards. I have turned some 15mm cherry dowels and will use them for alignment and provide support vertically (so I’m not just relying on the sheer...

I thought the bottom must be in one piece rather than loose slats. I’m considering doing the base of mine out of plywood and then facing the cut edge in some leftover cherry.

Beautiful crib! I can see for the base you’ve gone for slats, and halfway up a threaded insert for the higher slat position. Did you just have a removable rail for the top position for the slats to sit on?

I’ve ordered the round profile bed rail bracket and I’ll see how well it works. thinking I might need to add some bracing on the bottom apron running perpendicular to the long side to prevent racking but I’ll see how stable it is once it’s all built up. If I do need the bracing the *** bolts I...

I’ve found a couple of recessed ones available in the UK https://www.ebay.co.uk/itm/405042547316?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=wrwifjxftjq&sssrc=4429486&ssuid=ilcX9jeFRC6&var=&widget_ver=artemis&media=COPY...

The rebated one looks interesting as it would hide all the joinery. would this afford a tight fit by itself or does it need some other hardware to keep it put?

I thought about this but you’d see the hardware inside the crib and the outer side so not the most attractive option

Yeah brass slotted I think would look nice if there not any other way to attach. I’m a bit reluctant about anything with caps incase they come loose what with it being for a baby.

Hi, I’m planning to attach the front and back of my crib to the sides so it can be taken down for storage. Hopefully you can see the front / back pieces are M&T jointed to the 2x2 leg, and the sides are a complete unit that will connect onto the leg. I was thinking of using a floating tenon...

I had a similar question for a crib I’m building and I’ve been trying to read up on finishes for this purpose. One take from a book I was reading suggests that all finishes are food/toy/baby safe once cured. Which opens a lot of doors for you. If you’re playing it really safe from my reading...

Hi, just wondering if anyone has some ideas on wood finish for the crib. Framework - American cherry, bars - mix of cherry and English beech Attached mid progress pic to give idea of colours. And the sanding sealer on some off cuts I was thinking about using shellac based sanding sealer and...

Fits perfectly cheers! Just for the others who got them 3D printed be gentle tightening it up, I’m always too heavy handed and you can see the stress mark at the front… oops!

Thanks for the replies. I’ve sorted though my offcut pile and I think there’s just about enough spare pieces of cherry to do some contrasting bars out of that to complement the beech (framework is cherry) I’ve gone off the idea of filing these knots now, I don’t think it’ll give me the look I...

Thanks, Just to clarify - a two part epoxy like araldite (or own brand equivalent)? And any finishes I should avoid if I use this?

Thanks, any products you’d recommend? I’ve not worked much with epoxy, only Milliput which I’m not sure will get into all the gaps in the knot. Would this work - with a black pigment added? https://www.turners-retreat.co.uk/glasscast-10-casting-resin/p3713 Thanks

Better picture (was at work when I sent the original and only had what was on my phone)

I’ve been rough sawing a load of beech for the bars of the crib I’m making, a few have these large knots: some have a semi-loose part in the middle and others that are gouged out. (Sorry for bad description) I intend to thickness plane the bars but I don’t think it’ll be enough to remove the...

In the file (I wouldn’t know how to open it) how is the post attached? Do you add a nut to the underside like the stock one or is the thread 3D printed? It’s a really kind offer, thanks. I have had another member message me about making a metal one, but I don’t want to put them out. If 3D...

That looks pretty good, how do you go about getting one of these 3D printed designs actually printed if you don’t have a machine?

Yep this is pretty much it. Are these 3D printed plastic ones strong enough to not give flex like my plywood part did?