Search results

Unfortunately none despite there was an extensive range

Cheers. I had to put a rebate in the beading instead as I was unable to find any locally. It wasn't fun doing it without a router table but I got there in the end. I will start looking into getting one and would start my research in the next day or two.

Pleased to say guys that this is the door so far. Thanks for your input

That is what i have decided to do but at least one panel needs to be replaced as it is rotten at the bottom and so is part of the mouldings. The question is do i replace the panel with plywood as its going to be painted and plywood is what is currently there.

Hi Guys, I started working in the door about 20 minutes ago and to my surprise the panels are not rebated in place. There is beading on the inside and the plywood panel seats on the beading with external beading holding it in place. What would you advice? As much as i would like to replace...

Thanks. I'll make a start with your suggestion by removing the beading on the inside and fingers crossed there is just one panel there and that it is not sat in rebate. I had a look at it earlier and I did question if there was one panel or two for the simple reason that there are pins that...

Replacing the door is not an option as it is not a standard sized door and would have to be custom made and I obtained a quote to do this which was 6 months ago @ £3.6k!

making my own panels is what i will struggle with due to lack of suitable clamps and planer/thicknesser if required. The door was filled and made good a few years ago but its took a battering from the weather the same weak point has reappeared at the bottom right hand of the panel. As the door...

As requested please see the pics attached of the door from the inside.

Hi, My front door needs renovating and after having had 3 carpenters/woodworkers in to quote for the job none have got back to me so I am going to tackle it myself. Firstly I need to replace the panels, what can you suggest I use. I had hardwood panels in mind but I have struggled for find...

Thanks for the replies but pardon my ignorance as I am really struggling to understand it all. In the picture I posted the cill(145mm x 45mm) is shown on the floor to the left. Am i right in thinking that I should get a water bar which would then be rebated on to the top of the cill? The Cill...

Hi, I am a bit lost as to how I can best install the cill to my garden office. Am i best to attach it next the frame so that it is level with the sub-floor or should i have it placed on top of the sub floor? Picture attached. I hope I have explained clearly what i am trying to achieve. Thanks.

That is truly awesome and i hope i can one day make one like that Can i be rude and ask how much that set you back in materials and how many hours did that take?

Any suggestions?

Hi Guys, I now have all my rafters in place with 11mm OSB fixed on to them. The finish is to be felt tiles with a felt underlay (IKO). The rafters are 95mm deep and I plan on using 70mm foil backed insulation - Does this leave enough of an air gap between the insulation and the OSB or will i...

Thanks for your suggestions. Roof finish is going to be roofing felt and then felt tiles. So light weight

In terms of membrane i intend using Dupont Tyvek house wrap but I am trying to source something cheaper

Please see the photos attached.

Hi guys, I need some guidance as i am now in the position whereby i am about to put in place the OSB sheets on the roof. The problem is I got frustrated finding the angles of the rafters and installing them. It was my intention to leave a 12mm gap between the top of the rafter and the top of...

Thanks for your reply. the ridgeboard is 45mm thick, with the height being 2500mm and the width 3048mm. Cheers.