Search results

I have a pair of Bose QC35 noise cancelling headphones. They are maybe a bit pricey, but really very good. I use these in the workshop when machining, with just noise cancelling function - I don’t usually like to listen to stuff whilst machining, as I prefer to concentrate on keeping my fingers...

I quite like it - looks like the faces of the arch need replacing - a job for Tricoya - and no doubt new lead capping. I would think the added height provides a little more security. A repair is probably just as simple as replacing the whole frame. cheers

One of the manuals on this page should help. http://incawoodworking.blogspot.com/201 ... 1.html?m=1 Very nice bandsaw by the way. Get yourself some blades from Tuffsaws (just don’t forget to remind them that the blades are the opposite way round to most bandsaws). Cheers

Thanks again for all the suggestions. I am still making another enquiry from Switzerland as to whether the original replacement part is available. If not, I will figure on the other thoughts - of all of them, I had wondered about the feasibility of welding a build up on the points and then...

Hi Marcros The French parts supplier (Incamachines.com) has confirmed the roller is very worn, but suggested it may be worth replacing the springs (to increase tension) but I have rebuilt the machine a while ago and the spring tension seems very high already to me. The diameter would need to...

Thank you for that. It is a good question about polyurethane (I guess that is what is on the feed rollers of my spindle moulder power feed (much squidgier and the Scheppach rollers are a higher hardness). The Scheppach rollers are widely described as patented; that must have expired, but I am...

Forgot the picture!

That is a good thought, thank you. However: - I am not sure that “knurled“ was a good description - I couldn’t think of a better one - see the picture below that shows the points and where they have worn on the middle section particularly. - I think any remachining would reduce the diameter of...

Hello This is possibly a long shot. Does anyone have some old feed rollers from a Scheppach 260 planer? I have a (mostly lovely) Inca planer thicknesser that is let down by the original knurled feed roller being worn. I also have a larger Scheppach planer with rubber coated feed rollers that...

This is a workshop cabinet I am just putting together - not a kitchen unit, but it shows how I do the birch ply splines. This is the router cutter I use (easiest in the router table, but also can use it handheld). Cheers PS I cannot work out how to show these pics the right way up!

There are so many ways of skinning a cat, but a few points on the basis of what I have done in the past: - I make face frames at 40mm all round - the overhang depends on the situation - at exposed ends the ff is flush to the side (but I fix a 6mm bead board or similar on the sides) - against a...

Hi I would love to have these (and when finished, I will duly pass them on). I think I can ask my sister to pick them up(!), so I will send you a pm. Cheers

Hi I sent you a PM Cheers

Thank you for these Robbo. All safely received. Cheers

Hi Are these still going begging? I have just dug out my old Bosch scraper (very useful for occasional odd jobs, but I think now out of production). I am sure these bits will fit it. If so, let me know and we can pm details. Cheers

I have Tersa blades on my Inca planer (260mm) and these are M42 HSS which seems to be standard. This planer is used for light stuff, but the blades have lasted very well. My larger Ixes (Scheppach) 410mm planer uses 3 Centrofix blades which are similar to Tersa. I have some M42 HSS sets, but...

I have got hooked on the Sampson Boat project. The finish from a planer may be slightly better, but the thing that has struck me from watching the videos is the precision applied on the whole boat construction - quality furniture grade fit. Cheers

Hello All This is a bit of a long shot. I have a (Record Power branded) Nova DVR XP large and have often thought I would get a bed extension sometime. Now I need one, it transpires that not only have Teknatool dropped this model, but the UK Teknatool distributor is in the process of being...

I bought a set of these for the pillar drill - they are absolutely excellent and as has been said nicely engineered. I think I bought a supply of abrasive strips at the same time and I am still working my way through these. I bought my set at a show many years ago (maybe Axminster’s?) - I...

Do you have any offcuts of the slab itself? If so, given the style of the table, I would try to patch in some pieces to match as far as possible. They would only need to be a few mm thick and you could fill most of the hole with dominoes. They would not be invisible, of course, but if you can...