Search results

DM tools have the BM16, https://www.dm-tools.co.uk/product.php/ ... _vgXVp4rIU

Heather, if it's about repeatability and not knowing what machine you use but could you not use something like a gauge or slip block to set the machine.

Trevanion, my Makita reads bottom to top, 0 to 150mm

Thicknessers and pillar drills have a vertical scale, try looking for spares for one of those.

just found this, looks a dead ringer. http://powertecproducts.com/71021vg-ben ... grind-jig/

Some kind of fingernail grinding jig, possibly.

They are only available here second hand, look on auction sites etc.

Naznomad, sometime last year on a Delta with the Quickset clamps, timed himself from finishing an internal cut to starting another. That's pressing the stop button, releasing the blade, putting through the next hole, clamping, re-tensioning and pressing the start button again and did it in 7...

If you don't mind second hand look for a Delta with the Quickset blade clamps. I've been using a Delta 40-560 type 2 for over 25 years.

I think you need two spanners, one to hold the spindle and one on the drive centre. I'm with Phil, I don't think it has a morse taper.

For me, Record every time over Clarke.

Dark.

Link for the Hegner blades, https://www.hegner.co.uk/catalogsearch/ ... 0&q=blades also Original Marquetry, http://www.originalmarquetry.co.uk/cate ... ades_1.htm I have used both of these, Original Marquetry postage is high (around £9, if memory serves) but they have some different blades to...

Yes but they are not reverse tooth blades, if you want reverse tooth Hegner sell them, also Original Marquetry. happy scrolling Steve

You could try Niqua blades, they are available from several suppliers.

Yandles have a good range of them. but they are also available from Amazon, Hobbies, ebay. There maybe more these four came at the top of a Google search.

British Hardwoods do hobby packs of thin wood. https://www.britishhardwoods.co.uk/timber.html?p=2

I'd say go and have a look, won't hurt anything. There's also one in Worksop and also the Hub in Huthwaite, not sure if that's along the same lines as men in sheds though.

I use one of these. https://www.proopsbrothers.com/magnifyi ... -844-p.asp

I use 3 sizes of Niqua Speed reverse tooth blades, No's. 2/0, 3 and 5, available from several suppliers. For 15mm I would use the No. 3. Other good makes of blades are Olson and Pegas.