Search results

Had a read up on static explosions etc and it seems in a giant workshop with a giant size extraction it may be a problem but in a blokes shed in his garden running it for 5 mins max it's never going to be a problem. Apparently it was on the American show myth busters and they decided it was...

Hi it will be fixed to the ceiling so out of the way. At the moment I connect one extractor by flexiable hose to the machine I'm using but 90 percent of the time if its a 10 min job I can not be bothered. I just wanted it so a flick of a switch I have extraction. Plus I'll have a hoover hose at...

If I use the 135 degree ones I would still need a 45 degree connector also to get it to run at 90 degrees to my wall...are the top ones unsuitable for dust extraction?

I'm thinking of putting a 110mm soil pipe down the middle of my small workshop ceiling with branches off to each piece of machinery. I've bought blast gates for each point but undecided which brach connectors to buy, a lot of people say don't buy 90 degrees... Seems I have a choice of or the...

Just out of interest where are you based?

With the wheels removed, motor removed and the table comes not fitted it was not a dead weight. As I said I just strapped an old skateboard to bottom of the spline and easily walked it...might be different going up or down stairs! The motor must weigh 15-20 kg and cause its side mounted makes...

I finally ordered my new Bandsaw from Yandles. It took 2 days to arrive, arrived Monday. I had received a message from Yandles to inspect it as the pallet company had said there could be some damage. Sure enough after checking it on the back of the delivery wagon the cast iron table which is...

says it then gives you a list of UK stockists

hi I did see on the Record Power site it said that the Sabre 450 was not for sale in the UK only in the EU, which was q bit confusing?

The thing that put me off the Record Power BS400 was the blade guides, they use the flat discs, while the 450 uses the spring loaded bearing type. I got the flat discs on my BS300 and not so keen on them

I'm upgrading from a 12 inch Record power bs300...the thing that attracted me to the Sabre 450 was the braked motor

is there any reason not to buy the Charnwood w740 instead of the Record sabre 450. I know the charnwood is a little smaller 16 inch instead of 18 inch. But it has a 3hp motor which is braked and comes with wheel kit and sliding mitre saw fence which the 450 doesnt ? it cheaper too.. are...

Hi thanks for your reply .I normally only cut random pieces so when I saw the foot brake on the laguna it grabbed my interest...I normally only cut for 30 secs then wait for blade to stop then cut something else so it seemed sense to have a brake. I didn't realise the SB450 had an electrical...

Yes mine has cast alloy wheels and a quick release so must be an older model

yes just measured and it is 300mm wheels on it

only reason I measured is because I'm buying a new bandsaw and thought I'd see how much bigger table I'll be getting for my £1800 outlay. Was a bit gutted when I realised the new Laguna 14BX will have an actually smaller table....

I was measuring up my Record Power BS300 bandsaw and the table measures 500mm x 550mm But everywhere you look it states the table measures 400mm x 480mm why is this? I did note the next model up BS 350 has a 500mm x 550mm table

ebay axminster