Search results

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. MikeJhn

    Any central heating epxerts on here - oil fired Riello burner

    This is what he has told you, they either work or they don't, get in another engineer, they are running you around in circles and presumably charging you for every visit, add up the cost so far and put that against the cost of a new burner, sometime YOH could be right.
  2. MikeJhn

    Any central heating epxerts on here - oil fired Riello burner

    That would be a balanced flue burner which requirers the gas's to be checked at two different access points. I would question your service engineer as the only gasket that could cause that is the one between the burner and main burning chamber, only accessed during their servicing!!! Reillo...
  3. MikeJhn

    Any central heating epxerts on here - oil fired Riello burner

    Stop messing about, go here: RDB REPLACEMENT GUIDE | Riello Burners But have you checked for water in the oil? Easy to check, take off the oil outlet pipe from the pump, put into a container and push lockout button, it will lock out again, but if the oil comes out frothy you have water in the...
  4. MikeJhn

    Workshop burgled, now my tools are on eBay

    If as the reports say he was lying in wait for them, would give evidence that he had been burgled before and knew when and how they would access, so the "Claims" that he had been burgled before not being accurate are in themselves not accurate. The type of shotgun being illegal is irrelevant, a...
  5. MikeJhn

    Any central heating epxerts on here - oil fired Riello burner

    Has your oil tank had the water drained out of the bottom recently? Water absorbant socks are available. No matter the problem get a dual flow filter Tigerloop on the oil line? Helps eliminate air in the system. Sometime you can chase these type of problems around for age's getting cold and...
  6. MikeJhn

    Workshop burgled, now my tools are on eBay

    Let's not forget that the Farm had been broken into multiple times by this 16 yr old and his accomplices, Martin shot him as he was exiting his kitchen window, it's not just as simple as he shot him in the back.
  7. MikeJhn

    Workshop Build: Turning my frog into a prince

    Lay paving slabs on top of the concrete slab edge at an angle to deflect the rain, ensure you use gutters on the buildings and RWP to a soak away, stream, a proper soak away not a hole filled with stone.
  8. MikeJhn

    Workshop burgled, now my tools are on eBay

    But your honour I come from a broken home and have (insert trauma of the month) as a result and am not responsible for my actions. 🙄
  9. MikeJhn

    Workshop burgled, now my tools are on eBay

    I have lead a sheltered life, had to look up the meaning of "Virtue Signallers"
  10. MikeJhn

    Gunstock door

    Grange is French for Barn.
  11. MikeJhn

    Workshop burgled, now my tools are on eBay

    I have a GBH conviction record for attacking two burglars in my parents kitchen when I was sixteen and into martial arts, I am now 75 and wished I had done them more damage, I only broke the collar bones on one and the jaw of the other, would I do the same now, in the circumstances of them...
  12. MikeJhn

    Gunstock door

    @schnapps95 OK oh enlightened one for us not so knowledgeable show us what a gunstock door should look like.
  13. MikeJhn

    New router lift needed/Sauter Vs UJK?

    Agreed there is no doubt the MuscleChuck is one of the best add on's you can make to a router, even if not in a table.
  14. MikeJhn

    New router lift needed/Sauter Vs UJK?

    Hope the remote switch is an NVR? The interlock and position of the switch is why I sold my Triton Router, the Triton Router table is a terrible design, despite having the above table raising facility the position of the hole to access this is under the fence, bad design as you can't move the...
  15. MikeJhn

    Log lamp...

    Just a thought, may be easier to start the hole with a plunge router if the top is flat, would give a guide for an auger bit.
  16. MikeJhn

    ***** builders

    The whole of the construction industry runs on its programming, if you can cut out an operation or speed one up then it will be embraced, not having to chase walls for electric cables and dot and dab plasterboard on top of surface tacked T&E is much faster than chasing the blockwork and running...
  17. MikeJhn

    ***** builders

    Cement coating blockwork before plastering was known as Bagging as the cement bag was often used to apply the Cement, it was just a way of sealing the porous surface of the block to prevent the fist coat of plaster from drying out too quickly as opposed to wetting the block, also used on...
  18. MikeJhn

    BS400 bandsaw blows fuses regularly

    This would probably do the job: 13 Amp Time-Delay (Slow Blow) Fuses X3 | Forest Master
  19. MikeJhn

    ***** builders

    Has Postcrete been around that long?
  20. MikeJhn

    New router lift needed/Sauter Vs UJK?

    But it does extend the shaft above the existing collet height.
Back
Top