Search results

Very interesting info on the batteries 👍👍

Yes for sure and a previous post mentioned the pressure you apply , i just find the digital vernier is second to none for confirming if a 6mm drill bit is actually 6mm or the steel or brass rod is the diameter you expect it to be . I dont need to be super accurate but close enough to get a...

I,m wating for the “ digital verniers have no place in the woodworking enviroment post .🤔🤔

I,m on the 2nd battery in years for my vernier and are not removed . My micrometer is not used Much so batteries are removed ..

I think a lot of these so called energy savings are little more than gimmicks that add to not only the overall cost of the appliance but to the cost of spares . Its also likely to create false call outs as most folk are used to how regular cooker ovens and would see this as a fault ..

Many many years while doing my c/ o / guilds we were tasked with working out the consumtion of a gas refrigerator for a year . Far too long back to recall the figures but seam to recall it was less than £1 , just shows how much ghe cost of gas has risen over the last 35-40 years.

Blind as in im given a paper and i could tell what colour box it came from .. ive never had good eyesight hence a quality digital gauage and as you mention they will switch between metric and imperial ..

Only 1 choice for me -mituttoyo .i got these via snap on over 12 yrs ago and they are as accurate as i could ever need . Dont smoke anymore but i could blind measure cigarette papers and tell you what colour pack ghey were from eg red green or blue or silver . Main uses are for when my woodwork...

Hi and welcome - qudos for your enthusiasm but for a complete newby thats a massive project . Please dont take this in a negative way but what tools do you currently have ? If you only have basic or minimal tools a project of this calibre will hurt your pockets in terms of materials and tools...

I doubt they are atm but they probably will be at some point . But like any new technology the existing appliances will still be around years/decades from now . Interesting thread and another one of those days you learn something you didnt expect . 👍👍

Im guessing its some sort of energy saving feature due to eu carp , im assuming its a fairly new appliance ( or new build house ) can,t imagine the saving is that great over the time it takes to cook an average roast . 👍👍 Edit - from what i can actually read of the description its A rated so...

Gas cookers by design will shut down to BY PASS rate once the set temperature has been reached .the bypass is built into the oven stat . As the temp falls again the bellows in the thermostat open allowing more gas to flow then of course the oven burner flame increases . If the bypass was...

Toupret dry powder filer , easy to sand and doesent sag or shrink . Just mix on slightly dryer side and fill sand and refill if reqd .

Given that looks like under floor heating pipework then access will be reqd for repairs and maintainance so i guess it depends what ghe customer wants - so price for cheap as chips mdf or plywood boxing in with an access panel for any repairs etc and a more upmarket version as you have...

My vote is with millwaukee fuel , brushless . Very strong and replacement batteries are not too expensive . I try to buy when they are on offer or choose the option with two batteries . When you have a few kits you can then look at other tools in the range but buy the tool bare ( no case ...

Hi and welcome , the only extended course ive been on is the school of the self taught lol. You gain help and advice from multiple sources and you learn from your success and of course your fails . In all honesty courses can be invaluable but jumping in at ghe deep end will give you greater...

Hi and welcone , its not often i hear such kind comments about the uk - thanks for that . Ask for help and advice anytime you need it .hope your woodwork goes well ..

Either way if your post was in 2 parts eg why is this happening , how can it be put right followed by how can i repaint the soot stained wall it would of made sense but in your reply to my advise -you,ve stated the issue wont be repaired ??? . If you intend to disclose this issue to the next...

Thank you - i didnt comment any further as i was in part shocked at the reply and also not in any mood to start a thread argument .however I thought it strange how anyone would leave a potentially dangerous flue for the new owners to discover and even worse to mask the problem with a coat of...

Sounds like end of days unless the motor can be replaced /repaired . Would you be able to source a replacement for the cost of a motor etc ..