Search results

I wouldn't bother, just get a 12/24/48v one and charge batteries which will power stuff via an inverter.

Same as faithful / spear and Jackson etc

Excel table saw copy of the Rutland / DeWalt saw https://www.diy.com/departments/excel-254mm-portable-table-saw-240v-1800w/5056533439898_BQ.prd?&&&&gad_source=1&gclid=Cj0KCQjwlN6wBhCcARIsAKZvD5jZdFy-GjH96e4P76EO_KR5HQwWyY3JshBHNuNESaGHoGDdM9J6IbUaAu9zEALw_wcB&gclsrc=aw.ds

https://www.ebay.co.uk/itm/391472396773?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=dGsYz2xWT-y&sssrc=4429486&ssuid=ptixoXeJTeO&var=&widget_ver=artemis&media=COPY These chisels would do too. Also look a an old Stanley / record plane which can be cleaned up in half an hour!

Thanks I have a trustees meeting this week and needed some inspiration!!

I buy 5x1 sawn timber for a cladding company at £1/m. It's very dense and clear of many knots. A scrub plane and no 5 soon make it smooth. Also floor boards new and old are good source. Used ones will give your furniture patina as Drew would say! I've even used the grove as a rebate for...

https://www.ebay.co.uk/itm/386860559476?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=bDmuh-1VRCS&sssrc=4429486&ssuid=ptixoXeJTeO&var=&widget_ver=artemis&media=COPY

That's poor QC our record one isn't jumping around like that, and I'm sure it's probably the same machine.

It's a JOKE!

I'd just use cheap epoxy tubes from pound shop etc and mix as required with pigment?

A better way might be putting in some heavy purlins in say 10x3 and doubling up the rafters. Older early 20c terraced houses were built like that. But obvs take professional advice.

If you ever need an assistant!

That would work not even a lithium battery just a decent Leisure battery with a 3kw inverter would be fine for intermittent use. Charge it up using a local battery charger. Not efficient but would work.

How about shipping a petrol generator out with them??

I would use 6x2.

Cheapest option lay treated 3x3 fence posts on the slap with dpm membrane under and across the floor with 2" concrete or insulation and boards on top. Build shed off the fence posts making sure the cladding goes well down the fence post. Apply bitumen paint under.

Looks awful, I'll pm my address...🤣🤣🤣

Nearly £2k - a bit steep....?

Polyurethane varnish+1

https://www.damatomacchine.com/en/combination-machines/ Any use?