Search results

i wish to thank tom for all his help sorting this problem out . The startrite 275 is working flawless now with the paddle switch , using the chinese VDF im really happy with the saw ,its not as loud as the hobby saw i have and ive had no problem using a 13amp plug in my shed .

Hello I am looking to buy a suitable relay to enable me to have three wire control on my Huanyang VFD. It will work great with two wire control, but since I have a NO start push button, and a NC stop button, I need a relay, The inbuilt relay on my Huanyang inverter is faulty, and I am not...

Blimey its a bit dangerous that thing . Do people actually buy rubbish like that lol .

Those projects you have done bob are brilliant ive just been looking .

yeah im going to take a visit to charnwood just to look at them , ive been looking at the startrite bandsaws but i cant get one to big as i aint got the room in my shed , ive took your advice on board mate ,what you said . Blimey you live in cyrpus . Get some great advice on this forum it great...

cheers for that mate ill nip up in the week and have a look at there bandsaws like you say it will give me a good idea as what to look for i never thought of that

hi sunnybob yes i can see exactly where you are coming from . which band saw did you end up buying mate ive looked and ive seen some which look good machines and they were £1700

thank you for that i only need one to use in my shed im only a beginner as i get better then ill probably be looking for a more expensive one

hi every one im looking for a band saw , not quite sure which to get as im limited on space in my shed i can stick it on a dolly then i can move it about as and when needed any advice would be good . A good 2nd hand one would be just fine ,looking for one to cut wood its only for my hobby...

ive already bought 30mm to 5/8 ive already purchased a 30mm reducer already as theres plenty of choice to be had

just wondering the people who have the startrite 275 table saw which blades are you using and where were they purchased any help would be great thank you.

be great that mate if you have a picture ive just been looking at a enclosure 30dx30w x37h cm im not sure if its to big .

cheers for that mate i was just looking to see if any of the metal money boxes were big enough then if they are ill do it like you have said . would make things easy for me as i no the lid will shut properly . yeah i read that about dont use the existing switch gear and wire straight to the vfd...

cheers ive been looking at these and am i right in thinking there ok with dust mate there are a look at £100.00 mark .i no the invertec are more expensive but i think they are ok to mount just under the table top .

which vdf do people use on the 3phase table saws i need help which one to buy

im sure they will be threads about this but ive had a good look through but i cant find any. im trying to mount one on the actual saw . im worried about sawdust entering the box is there a way round this it a SPEED CONTROL 2.2KW 3HP 220V VARIABLE FREQUENCY DRIVE INVERTER VFD 10A any help would...

yes mate was just looking and on one of the pictures it shows genuine one and a fake one Nice options available in the control software. Soft start, dynamic braking and speed adjustments with limits. when i get one im wondering the best place to mount it. i seen the one where its attached to...

just been looking at the ones you mentioned this one is £95.00 3HP 10A 220V 2.2KW Variable Frequency Drive VFD Huanyang Inverter High Speed This VFD can be used for constant torque loads(such as hard starting:Air conpressor,HVAC units) and variable torque loads(such as pumps,fans,etc) It can be...

hi just copied this and this is what it say mate Technical Paramer: 1.Inpute voltage:220V±15%(we also stock 110V and 380V+/-15%,please contact us for item stock) 2.Output voltage:220VAC±15%(analogous to input voltage) 3.Input Frequency:48-63HZ 4.Outpute Frequency:0-400HZ 5.Inpute phase:1...

what ive done to day was take the saw table top off was quite easy makes it a lot easier to lift into my shed . ive took the motor off and gave it a good clean and was easy lifting the base in the shed on my own . ive cut angle iron ready to get welded then fit casters . im looking at this its...