Spectric's latest activity

This might prevent you from tightening the fixing nut, ie it starts off as appearing to be tight but due to compression of the...

I would be very suspicous at that price as it is really to good to be true, plus why has @Phil Pascoe not purchased ?

A good idea, you now have no external input to the hot water vessel and unless hotwater is used you have a constant pressure in the...

Good point,, but our friend has said that the discharge is occurring when neither the heating system or the immersion are on,,,a static...

But there is a pressure regulator that maintains a constant lower pressure on the hot water vessel infeed so any fluctuations with the...

The stop cock might just be a red herring, yes if the old one was partially seized and not fully open then it would effect the flow...

8 x 4 ft sheets are quite difficult and potentially dangerous to handle especially on your own . So my take is a couple of saw horses...

That made me think that although you have a system boiler it sounds a little more than a "system boiler" so this is the diagram for the...

A very good question, expansion vessels are a common cause of pressure release from cylinders but not just at night ! Scalding hot...

Better to use at least a metre of single wall first and then the double wall, the single wall will then radiate heat that is otherwise...

So if the pressure has not dropped then we know the closed loop is not the issue, this means the issue is the hotwater cylinder...

The person who told me was @deema

It will be interesting to see what the heating guy finds on Tuesday. If you only had the boiler running for the central heating and no...

Also you tend to pay top dollar for cordless tools, small handy drills that have been around now for decades are really good value for...

For my 2p's worth. For general home DIY use an 18v combi isn't the best. Combi's suck at drilling masonry, a cheap 240v SDS is a million...