Spectric's latest activity

A garage is often poorly insulated and requires a lot of heat to get it warm. Options are 1) Woodburner and a good place for your...

What stands out for me when looking at people using a spindle & a router table is that a router only has a limited height of cut, about...

Maybe a new tool but not a new concept, Kreg Mortice mate Jessem pocket mill pro In my opinion it is a complex method to produce...

This is a must have component, on my OSO cylinder it looks like this where the two switches are in series with the stat being adjustable...

That sounds very wrong, look at diagram below. Items 2 & 5 are the over pressure / over temp valves that must be OEM fitted and part...

Think long term and buy a kit with drill and batteries...

I think we can ignore the stop cock replacement and that it is just coincidence for the other issues. The mildly explosive sound...

This may increase the flow but not the pressure, plus the cold water supply is not permanently connected to the boiler and is only used...

This could be an option, https://www.tlc-direct.co.uk/Products/KBOP9R.html

The fence was a major upgrade on the Sabre machines over the previous BS machines and is available as an upgrade for the earlier...

At what frequency, also is it centred without any offset ? How is the geny connected to the building ground as it is possible to get...

What is it's inductive current rating ? A lot of these devices are rated for resistive loads with little capacity for inductive loads...

The dust from my bandsaw is insignificant compared to my mitre saw so it has no extraction connected but gets a hoover out every month...

It comes with age and still trying to do what was once done in the blink of an eye !

I am using a Muscle chuck on my Triton router fitted in a router table and another in my Dewalt 625 router in a Woodrat and both make...