Recent content by roadrunner45

Hello, The screws in the door hinge have pulled out of there existing holes and now will not tighten , the hinge connected to the door is okay it is where it mounts to the main door frame where the issue is. What is the best method to fix this , ideally without taking the door off? Thanks for...

Hello, I am looking to buy a new cordless combi drill for general DIY use , I have Erbauer 18 volt cordless tools so would make sense to purchase the same manufacture as I have a charger and 18 volt battery already. So any advice on cordless combi drills much appreciated and a reasonable...

Thanks for the advice , I will use the cut down post option, I have never used postcrete but hopefully straight forward, let me know if you have any tips using postcrete.

Hi All, I am planning to build a storage area behind my garage (1 metre wide by 2 metres long) with a small decked area to improve access as just uneven ground at present and maybe overhead shelter to keep the worst of the weather out. The challenge I have is that the sub frame planned will...

Excellent idea , my hop on will also be getting a wooden top , maybe offcut of kitchen worktop. How did you fix it to the hop on , you mention bolting on does that mean you drilled holes in you hop on or did you clamp the wood on some how?

An update on how well it went well. It did not go as well as I hoped , I managed to remove 3 of the 4 screws before the carbide tipped small hole saw broke off in the hole which meant i had a screw and the hole saw broken off in the hole , which was not good. When I went to fix the gate back...

Thanks all for your help. I have purchased carbide tip small hole saw and will use it this weekend.

Hi all , I have removed my gate for cleaning and treatment and had a couple of screws snap below the surface , pictures attached. What is the best fix for this issue? Thanks for your help.

Hi All, I have just brought a kreg pocket hole jig k4 and would like to know best place to buy the screws , as unable to find any Kreg pocket screws in Screwfix? Also has anyone made a mounting plate to help clamp in position when using? Also any other useful tips regarding the jig. Thanks...

Excellent list , some pictures would be good if possible.

Thanks for sharing , good inspiration for me.

Hello all, I am after some help with purchasing a new cupboard door to match the existing doors in the kitchen, one of doors has the laminated print flaking , I have attached photos showing the issue which hopefully will be more helpful than my description. Any help much appreciated. Thanks.

Hello , that is very nice unit. I would like to make a similar unit , I have a bit of experience in making some basic projects like work bench and tool holder , are you able to share the construction details with me to give me a better idea how to make my own unit? Thanks.

Hello All, I am planning to add 2 additional twin plug sockets in my garage and thought it would be a good idea for 1 of the plug sockets to include USB A and C charger built in , does anyone have any recommendations of type and make to buy? Thanks for your help.

Very impressive layout and I like the wood mounting for hanging different tools on and you can slide along to different positions, what do you make in your shed?