Rewound's latest activity

What's GBT ? If you are going to cut wood, why would you use a 4 flute HSS mill ? Think routers for a minute. No one uses HSS. We use...

firstly its not my machine and this is the cutters I have been told I can use! yep, they are the type of milling cutters I would use on...

Ihave the opportunity to use a CNC router and I am trying to use fusion to create the NC file so (soft wood) for a 7mm HSS 4 flute mill...

as in just dampen them, leave them overnight to dry out then see if they are tight again? or do you mean dampen and glue at the same time?

Thoughts on what glue to use. The tenons have been in an out that many times they are a little slack (just tight enough to stay in...

That would be fantastic to dovetail them in, master cabinet maker skill set a must! I could probably do one, but unable to adjust the...

I have just went back to the methods i have used in the past, stupidly time consuming, think I spent 5 hours today getting the joints...

I agree this works quite well, although you do need to drill the waste holes very accurately so as to just touch where your hole saw...

Don’t forget that the reason your hole saw is slow and clogged easily is because the wood you cut has no means of escape as the blade is...

if the bucket had a diluted PVA in it (6:1 , 10:1) I wonder if the wood would shrink back as much (I feel an experiment coming on)

I'm not sure if TV advertising is at all relative to myself as a white straight middle aged bloke. Th advertisers are clearly aiming...

i think its finished as a commercially grown timber - but lots to be reclaimed. the stuff I'm using is from some old school lockers that...

How do you keep them cool when using, I find I get tremendous heat build up. And I have seen chisels others use and they can be very...

It has a M12 through the centre - helped clamp it together then come in handy for the lathe, and will eventually give it great strength...

Is that the standard way of doing them - certainly sounds easier. Although in the unusual way I am making the centre leg it would mean...