meccarroll's latest activity

I hear you on the challenges with CNC limitations, especially when it comes to handling larger panels. I've run into similar issues...

Why do you not use a normal router bit in a router?

I used a plastic table cloth over my planer last year and it gave the best protection of anything I have tried in the past. I also used...

I'd go pretty much with what Chief Sawdust Maker has said above. A lot will depend upon the machine rigidity and power of the spindle...

I don't know myself but recently purchased Blum draw boxes and am fitting the centre stabiliser on 800mm and 600mm wide draws but these...

CNC Bits are designed for use in a CNC and can be very difficult to control if used freehand or with a none fixed router. I have a CNC...

I am in the process of making a kitchen right now and have a CNC (Steel Frame so rigid) and a Panel saw with scoring blade. I started...

Such a shame you are having to go through this any decent tradesperson would be back to make sure he puts thing right and keeps you on...

I totally understand why the original sliding sash windows used a wedge and groove at the junction between the pully stile and cill...

I'm happy with my fixing method. Yes it's true I won't know in a hundred years time because I doubt I'll last a hundred years but many...

The reason I scribe the pully stile over the cill is because all of the sliding sash windows I have ever repaired over 40+ years have...

There are tons of videos on utube about box sash windows. I have some off-cut sections pinned together from when I made some sliding...

Hi does anyone have a 240/220V tabletop edgebander for sale ?

Ok up to you but you need a good rigid frame for any real time saving machining and I would advise against the Yeti for what you require...

Has this project got off the ground? the reason I ask is it was originally posted in May 13 2024. I would def use a CNC to make...