johnnyb's latest activity

Just imagine the way the cutter must spin and the nut undos the same direction from the face. Inertia will tighten that nut. Easier to...

I've got an original tm3

I use a thick m42 blade and find it's often the wood that moves pushing the blade off. But as often nothing happens and it's fine. Thin...

I'd think it would work OK using epoxy glue.

Even if your chairs aren't as great you'll be well set to continue making more than one.

Tom thackeray s travishers are good but unhardened gauge plate. Of course this keeps the radius predictable(during hardening these would...

None of the items you've listed are really essential imho. There more for people who chose the green wood trad tools way. I'd consider...

No it won't have quite the same build but each coat of cellulose melts into the last and is the reason its usually sprayed if multiple...

Burnt sand mastic is just linseed and dry sand. In the appropriate colour its perfect for pointing stonework around timber windows. But...

That's an idea too I hadn't thought of but unless I taper the front of the frame the t hinges aren't going to sit flat and look right...

Just make the frame. Put in plumb and disguise any issues using mouldings, fudges. It's time honoured and something someone whose worked...

Deema did you ever get round to making those blower alterations? Just interested. The first systems allowed the air to constantly bleed...

It's surprising how changing the gun can completely change the spray set up. I purchased a cheap ebay gun and it's coarse but effective...

I made some fixed ones. See bevel slat shutters post

My graco hasn't ever leaked. My old fuji gun was somewhat prone to blocks. Tbf I changed how I used these systems so I only spray...