johnnyb's latest activity

No it won't have quite the same build but each coat of cellulose melts into the last and is the reason its usually sprayed if multiple...

Burnt sand mastic is just linseed and dry sand. In the appropriate colour its perfect for pointing stonework around timber windows. But...

That's an idea too I hadn't thought of but unless I taper the front of the frame the t hinges aren't going to sit flat and look right...

Just make the frame. Put in plumb and disguise any issues using mouldings, fudges. It's time honoured and something someone whose worked...

Deema did you ever get round to making those blower alterations? Just interested. The first systems allowed the air to constantly bleed...

It's surprising how changing the gun can completely change the spray set up. I purchased a cheap ebay gun and it's coarse but effective...

I made some fixed ones. See bevel slat shutters post

My graco hasn't ever leaked. My old fuji gun was somewhat prone to blocks. Tbf I changed how I used these systems so I only spray...

It's not that domino's are inferior it's just putting 10 large full depth domino's in perfectly is a tricky undertaking. Both for the...

A t40n is a bit more compact. Still 3kw though.

I would suggest a medium duty. Used. Complete with everything Inc sliding table, ring fence, power feed, tenon plate, micro fence even a...

Ditto. Air assisted airless is even better imho. But if your spraying 2k or solvent based a compressor and devilbiss is the best(still)...

I would even suggest a slot morticer is a far superior device.

I found the smaller one fine though

It just didn't allow the faces of things to line up as well as I would like. It was not precise at all.