Fergie 307's latest activity

Incredibly naive to suppose that the fact Starmer, or any other current cabinet minister was in opposition precludes any wrongdoing. For...

Spot on. First point to not loose sight of, is that in opposition, Starmer et al, quite rightly, exposed shocking examples of Tories...

I have a cheap Sealy one which has been pretty good, about £30 when I bought it quite a few years ago. Will read basic codes on...

If you intend to make them on a regular basis the idea has an advantage. You could easily make a jig that would enable you to cut the...

To be fair they are a long way off reaching the sleaze level of the Tories, Michelle Mone springs to mind. But they have also badly let...

Printed metal parts are being used in fighter jets but those machines are a little beyond most of us. Now if you have a buddy in...

Not in the slightest, many disgraceful examples by the Tories. I had hoped we might see something better. Unfortunately the current mob...

It might be worth sending some images and dimensions to the firm I mentioned in Bedford. I doubt it is actually manufactured by the...

Now a 3d metal printer would definitely be a cool thing to have in the shed :-)

Sometimes the cap is just in effect a holder for the rod seal, and to keep muck out. Once removed there might be another cap underneath...

The thing I always remember being a revelation about gasometers was that they didn't just go straight up and down, each section twisted...

So are you content that the leader of our government should be accepting freebies the value of which, if he had carried on at the...

However it's done OP needs to bear in mind it will be spinning at I'm guessing1400 odd rpm, and subject to considerable pressure from...

Worth building some kind of restraint that will hold it while you try and undo the end. I would be very careful. If it is a gas spring...

I think I am correct in saying that we're actually invented by Crosman in the USA for powering air, or more correctly Co2, powered guns...