Fergie 307's latest activity

Router table a very different proposition to the DIY table saw. Anything from Sideways suggestion upwards really. If you want something...

As for taking the end off I assume it is just a ball and socket. Perhaps a piece of metal or even wood between the back of the plastic...

Good point. Although looking at my very well used examples of the clamps there are no notches in the bar, but a little wear evident on...

I took am old enough to remember when Screwfix sold, well, screws, and nothing much else.

Indeed, in the mass murderer/genocidal maniac stakes, there are quite a few popes who would make some of the more often thought of...

Bit like religion really, many of the ideas seem laudable in theory. The followers tend to turn them into an excuse for unrivalled...

Indian ink if you want it really black

You are obviously keen about the appearance but personally I think it’s a losing battle. Probably time for a new top rail. What sort of...

I have always used these, I find they can exert more force. Had orange ones for years, used to be about £40 for ten from Screwfix...

I find the idea of the church as a fundamentally good thing rather extraordinary. Individual Christians certainly. But the church, for...

Only thing to bear in mind is the powders add opacity as well as colour. A good or bad thing depending on what you are trying to do...

I have an impact driver. Can't say I like it much. Very good for driving big wafer heads or the like, or where space is limited. For...

I make my own from bits of scrap, just turn them and bore them in the lathe to the appropriate size, then cut teeth as you describe...

It seems that people use an impact driver for all the wrong reasons, to me its a tool for construction work, burying big screws and the...

Screwfix now do a new range, I think they call them superscrews or similar. Stainless but with a good thick section under the head...