deema's latest activity

I looked out of the window whilst drinking a cup of coffee to wake me up this morning and it was sunny, the temperature was again above...

It seems to me Health and Safety on building sites is pushing towards battery tools. I know two house builders who have banned all...

I made an Oak screen door using biscuits for my front door. It slammed (I think a screen door should slam shut, doesn't sound right if...

The whole thing can be done on a spindle moulder with a ring fence.

Like most things, perception is reality. However, a lot of saw users haven’t used a lot of different saws or blades, so their perception...

This is just my view, but Freud blades are just a waste of metal. I’ve tried most blades, the last Freud blade I bought went into the...

The Sedgwick is built very robustly, I can’t imagine that anything will have been affected by the fall. Everything is hung off large...

Ok First I want to apologize wholeheartedly to Peter. You did not deserve what I wrote. I wanted to make a point but rereading it, I did...

I felt similar to @squib when I saw @AndrewG post but then I paused and thought how would I feel if I woke one day and found my workshop...

Wow, that's quite a leap. Its a fairly uncommon brand in the UK, and if you start with a Google lens search it will give you many items...

Bit of an assumption to say that any mis described tool is stolen. Could have been handed down to someone with less knowledge than the...

What a disgusting reply! To hope that a person who bought something in good face feels penitent in some way.... You actually have no way...

Well, when I last did a few I built a DIY router table, with the router mounted where the fence normally is on a router table, or in...

There are three things that affect cut quality, the first is the blade, for a glue joint finish you need a dedicated rip and cross cut...

That's OK. An industrial spec 10" blade would have a 2.2mm thick blade plate and a 3.2mm kerf. Your 2.5mm riving knife falls between...