deema's latest activity

Ok First I want to apologize wholeheartedly to Peter. You did not deserve what I wrote. I wanted to make a point but rereading it, I did...

I felt similar to @squib when I saw @AndrewG post but then I paused and thought how would I feel if I woke one day and found my workshop...

Wow, that's quite a leap. Its a fairly uncommon brand in the UK, and if you start with a Google lens search it will give you many items...

Bit of an assumption to say that any mis described tool is stolen. Could have been handed down to someone with less knowledge than the...

What a disgusting reply! To hope that a person who bought something in good face feels penitent in some way.... You actually have no way...

Well, when I last did a few I built a DIY router table, with the router mounted where the fence normally is on a router table, or in...

There are three things that affect cut quality, the first is the blade, for a glue joint finish you need a dedicated rip and cross cut...

That's OK. An industrial spec 10" blade would have a 2.2mm thick blade plate and a 3.2mm kerf. Your 2.5mm riving knife falls between...

I suggest downloading the Swedex catalogue because it has an excellent information section at the front. Second, the one thing I read in...

Would you like to volunteer and go through with a fine toothcomb Phase 1 which is the Risk Assessment Guidance and Risk Profiles and...

It's been said before, to suppress the people and achieve total authoritarian control you need to curb freedom of speech and public...

I've ended up going with trunking round the entire space at eaves height then 25mm pvc conduit dropping down to sockets and light...

I built this piece in the style of a traditional machinist's chest using ash and Sapele. I resawed the Sapele and the ash from some...

Or a finer stone. You make smaller passes to and fro and more frequent turnings-over until the burr is gone. It may get left as a "wire...

The burr is what does the cutting. You sharpen the edge as you would any tool to create the burr and then use something hard to rub /...