deema's latest activity

I have to be honest with you my experience with UFH is limited to say the least . I know for example that it runs at a lower temperature...

I have no detailed knowledge but would expect that the size of boiler is specified to warm the whole house to a standard temperature...

I'm not a central heating designer but my expectation would be that room size and expected heat loss would be taken into consideration...

Good idea for sporadic movement, but in this case I reckon it would probably be a few times a quarter? No door just one big garage door...

I understand that ‘heating systems’ should be designed such that all rooms heat up at the same rate, however, due to difference in...

The boiler is a Worcester 40 CDi classic Regular ErP setup for LPG. It’s the only bit I didn’t change in the heating system as I expect...

I'm guessing the same system also heats a domestic hot water tank which is where the legionella risk occurs.

Ahhh. Mouse colour :)

Line the machine up between two doors so you can feed in and out. Or place it just inside a door so you have max depth inside the...

The dichotomy I have is that to run the boiler at a lower temperature I increase the risk from legionella, since water should be stored...

Pre-condensing age how dare you Thomas Newcomen, why I barely remember him! I think you are correct about condensing boilers and max...

Pallet truck (usually rated at 2 tonnes +), and put your machine on legs so that the forks will slip underneath. It’s what all my...

So, having a resin floor in my own property is a learning curve, the first coat of resin is a scratch coat, it’s a further sealer (three...

@Bingy man The house has a modern self throttling boiler, whilst refurbishing the house last year I had all pipes replaced with a...

Many many years ago I was sub contracted to b . Gas and as such were trained externally on new technologies. With older , big cast iron...