MF1000

Update 13-01-2025 I managed to install the INCRA Router insert plate and the router is hanging under the table now. I was quite nervous...

Having tried most methods I have mine inside my hand tool systainer where they basically sit in holes upright for easy grabbing...

The only one I’ve found is 5m …not sure if that’s long enough for you...

I saw a guy making/selling these sleds on ebay for around 300, is this the base set up you got by any chance? Wondering if the quality...

No I thought it through and fabricated it myself ….far more satisfying and it works well combined with its ability to ‘flat pack’

I’d go for the upright as it leaves more usable floorspace. Chest freezers are useful though if you need to store a body before getting...

That is music to my ears! Found it very frustrating that with the old set up there didn't seem any difference in finish or stress levels...

The sled doesn’t need a vice like grip and with carefull adjustment of the bolts holding the router to the linear bearings you can get...

The rails are 20mm As with any milling of wood care needs to be taken on changes of grain and soft/hard spots etc. I have a spill...