Seascaper

You have to hone after sharpening as you may have created a burr on the edge. A hone can either be a leather bound wheel or a leather...

If you went to a timber supplier you would expect to pay between £40 and £60 for each board, it you went to a craft shop like Axminster...

The most obvious is go back to the plumber who fitted the stop cock and find out if they knew what they were doing. There are an awful...

Hello, I suggest you keep the Erbauer as a back up spare and get a new Makita 18v combo drill. If you had bought one instead of the...

Hello, Definitely the best compact table saw I have had in the past is from Kity. A quiet motor and with all the accessories removed...

Hello, I have a very useful Sealey soft start bench grinder with 150mm wheels on each end. The problem I have is that the motor in the...

Leather handbags at your charity shop can be a good find.

If you get an modern angle grinder they have a speed control which makes fine cutter if smaller items much better. I recently had to...

It was a machine I brought about 25 years ago. I have a dremmel which will take a rotating engraving tip but it lacks the banging action...

Hello, A German engraver from about 25 years ago has stopped working, I wanted to replace it can anyone recommend a machine. I note that...

If you can get two lengths of scaffold pole measuring wider than the base you will find it an easy way to move over a solid floor. I now...

Unfortunately the boat building in Portsmouth Dockyard also closed this year.

Hello, A very good camera for an A level student would be Nikon D300 with a small zoom lens 35/110. It is a good solid camera and...

Unfortunately magazines are a dying item, many now extinct. Practical Woodworking I have not seen for years, so too Woodturning...

Hello, I often wear a pair of leather close fitting gardening gloves, especially when drilling metal. I have cut myself several times...