UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I
Reaction score
5

Latest activity Postings About

    • I
      I'm down for it (79 years old). I trust the NHS though no doubt mistakes can be made. What is "getting out of hand" anyway? Surely...
    • I
      Iain Allen replied to the thread Websites.
      It depends if you want an online web shop or just a website to have an online presence to advertise your work or services. I use a...
    • I
      Iain Allen reacted to Fergie 307's post in the thread Proxxon KG 50 with Like Like.
      I have a set of diamond cutting wheels for my Dremel. Nothing flash I think they were Rolston or similar, arbour and about ten discs for...
    • I
      Iain Allen reacted to ChaiLatte's post in the thread Proxxon KG 50 with Like Like.
      When the effort is worth it, you can use a mandrel inside the tube to minimise crushing. The crush comes about because the inside of...
    • I
      Iain Allen replied to the thread Proxxon KG 50.
      Yes, I do find this which is another reason for finding another method. I have thought about using a lathe but I think the Dremel idea...
    • I
      Iain Allen reacted to Fergie 307's post in the thread Proxxon KG 50 with Like Like.
      Do you not find that a pipe cutter squashes the tube slightly? I am with Pete a lathe would be the best bet. Depends how many you need...
    • I
      Iain Allen reacted to ChaiLatte's post in the thread Proxxon KG 50 with Like Like.
      You can minimise deburring by making a fixture for the tube. If the tube is 6mm OD, drill a 6mm hole into a piece of metal and poke the...
    • I
      Iain Allen replied to the thread Proxxon KG 50.
      Thanks Pete I'd wondered about a slitting saw set up. The Dremel idea seems to work, I just need to make a better job of setting...
    • I
      Iain Allen replied to the thread Proxxon KG 50.
      Thanks Seascaper, I have tried the angle grinder idea 2-3 times with different discs (0.8mm) and the burr that is created on the tubing...
    • I
      Does anyone have any experience with this machine? I'm looking at cutting brass tubing 4.5mm-6mm dia and varying lengths 22mm-32mm and...
  • Loading…
  • Loading…
Back
Top