Tris

You could try some hardwood wedges to see if you can ease it out a bit first

The tipping idea did the trick, thanks. I also discovered the sight glass is blocked. When I get an hour or so I'll have to clean that...

You might hear old scratch sharpening his skates first Oh no! Didn't mean to start another sharpening thread

No luck finding a manual, it's model number is NRS.2. Will try tipping the thing over and see what comes out. What little oil was in...

Good morning all, I'm hoping someone in the know can advise me on this. I have been given an old Genevac vacuum pump, which has been...

Perhaps a rotation, London, Birmingham and Sheffield or Newcastle?

I was going to suggest @Jacob Do you have a bearing puller you could try? If not have a look here for a 'get you out of a hole'...

https://socialsync.app/fundraiser/cr-3q7j0vwo8p437 As an ex squaddie this is something that really sits heavy with me, far too many of...

A gun drill gives a dead straight polished bore, it acts as both drill and reamer. And the compressed air expels the chips so I can...

I've not used them before, so when I get up and running this will be a first for me. @Richard Evans is probably better placed to speak...

Well i finally got the new handle which was a little larger that reqd but the head was slightly wider in the mid section so it took a...

Interested to know what the advantages of a gun drill are over a lamp auger (shell bit type)? Just making up a vacuum chuck and found...

Tris has had a bit of a phonetic breakdown lol. To clarify they are lag not rag bolts, American name and it’s a misnomer as they have a...

+1 for getting a flat surface first My preferred way is short rag bolts through the upright ply into the log, take a cut to flatten one...