Sideways

The mortices and tenons on my workbench are effectively the same design as they are drawbored without glue, i just couldn't decide what...

Visually it's a nightmare. Holes everywhere. If the disassembly is going to involve drilling out a glued dowel, and the dominos...

Sorry to be negative but someone has to say it, it's rubbish, both visually and structurally.

Absolutely. In fact, if safety is the concern, far better not to have the mass and added diameter of a chuck spinning around. A "dead"...

The O.P. seems to feel that he needs a chuck in the headstock of the lathe to use a Steb centre or a cheaper equivalent. Clearly he...

If you have a #80 scraper plane, try a swipe or two over the planed surface. That tends to firstly show up the scallops from the...

Couldn't resist sharing this one, in the half-light just now. Nothing to say, just a pretty pic :) I probably need to get out more...

You should investigate all the hidden costs of owning a EV Insurance is significantly higher than IC Should it go wrong repair cost...

Just an observation : six out of the eight VFDs powering the machines in my workshop use vector control to boost low speed torque. These...

Radio 4 yesterday. "You and Yours" The brightest, sparkling, 80 year old rang in and sang the praises of her electric. She was the best...

So that is the early form of UK workshops before the internet and Jacob was in there then 🤣🤣🤣

Fitted, it's just about perfect tbh, it's 3300lm. Not sure about shadows though Sideways (we'll know when we do some work there), but...

That looks excellent to me. I agree that panels make a good, maybe even better alternative but now you know and if one isn't bright...

I installed these panels in my workshop 2 years ago and they have been great. There is a little wiring required to the driver and on to...