recipio's latest activity

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  • R
    You have to go a fraction deeper with the mortise. A change of brand might also work. If you are going to invest in quality hinges it's...
  • R
    recipio reacted to Doug71's post in the thread Latest Wall Panelling job with Thanks Thanks.
    All the beads went in after so no scribes. A lot of it is MRMDF but anything like the pipe casings or the bench that had edges on show...
  • R
    Fixed base routers are not often used here as you also have to buy some mechanism for holding them. If I were starting again I would buy...
  • R
    recipio replied to the thread Latest Wall Panelling job.
    Nice job. Did you use profile and scribe machining for the panels or just apply them with slips. ? Is it all MRMDF ?
  • R
    recipio replied to the thread Multitool advice.
    Off on a tangent here but what do people think of Sarah Beanie's house. ? I like her programmes and she has had medical problems to cope...
  • R
    recipio replied to the thread New member - bandsaw help.
    Looks like a copy of my old Multico.I swapped out a 1 HP motor for a 2 HP and still haven't enough power. :rolleyes: Something to...
  • R
    recipio replied to the thread End Grain Cutting Board.
    I made one using walnut, padouk and cherry once. It's probably better to keep the blocks as cubes and you will certainly loose at least...
  • R
    recipio replied to the thread D/S Tape.
    I use Carpet tape - the type designed to hold the edges of rugs in place. It's very sticky stuff and not too expensive. However if you...
  • R
    I did a spiral wooden stairs once with an acid catalized lacquer - Sadolins PV67. I had to evacuate the house for a few days due to the...
  • R
    recipio replied to the thread Maple veneer not sticking.
    Any burr veneer is liable to chip out if cut with a router. You are better to use a twin bladed marking gauge ( yes, another tool to buy...
  • R
    recipio replied to the thread Sun damage to furniture.
    What a nice piece of furniture. I have lots of American Black Walnut pieces that I made and they all have turned that ' muddy brown '...
  • R
    recipio replied to the thread Home library.
    I built a small reading room with a telly many years ago and I'd add the following. Only ' coffee table ' books are worth storing unless...
  • R
    It's pointless trying to blend a filler to try and hide the splits. Buy a box of Liberon shellac sticks and choose a colour. I would...
  • R
    recipio reacted to MF1000's post in the thread Whisky tumblers -advice please with Thanks Thanks.
    as a life long single malt fan ….WHY 😱 A good single malt is appreciated for it colour and nose as much as the flavour ….a wood based...
  • R
    recipio replied to the thread Whisky tumblers -advice please.
    Not so sure. I've been to Germany where they like to serve beer in stoneware crockery. I find it unnerving as I can't see the beer. ...
Back
Top