Spokeshave project

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rxh

Established Member
Joined
2 May 2011
Messages
699
Reaction score
77
Location
Surrey
Just completed: a spokeshave in padauk with brass sole plate and knob. The iron is 1 1/2" wide x 1/8" thick O1 steel.
 

Attachments

  • IMG_4077C.jpg
    IMG_4077C.jpg
    248.6 KB
  • IMG_4076C.jpg
    IMG_4076C.jpg
    220.4 KB
  • IMG_4075C.jpg
    IMG_4075C.jpg
    237.2 KB
  • IMG_4074C.jpg
    IMG_4074C.jpg
    246.2 KB
That's a lovely piece of work. Any problems with the blade wanting to twist with the single point of fixing?
 
Thanks guys. I am going to try it today and I'll report later on how it works. The iron seems to be well clamped in place but we shall see ......
 
Nice shave! their are plenty of single fixing spoke-shaves about so I don't think it will be a problem.

Pete
 
Thanks Pete. I tried it today on a hatchet handle and it worked well.
 

Attachments

  • IMG_4084C.jpg
    IMG_4084C.jpg
    243.3 KB

Latest posts

Back
Top